Abstract:In this paper, a reconfigurable transmitarray unit cell using liquid metal is presented. It consists of three conducting layers where the geometries of the resonators, on the different layers, differ and consist of an arrow shape together with rotated split rings. It is the first time that a transmitarray unit cell, reconfigured employing liquid metal, provides a combination of low insertion loss and large phase shift range. In this paper, a reconfigurable transmitarray unit cell using liquid metal is presented. It consists of three conducting layers where the geometries of the resonators, on the different layers, differ and consist of an arrow shape together with rotated split rings. The arrow‐shaped conducting layer has the capability to convert the polarization of the incoming waves by 90°. The split ring resonators, on the upper and lower conducting layers, have the same dimensions but different orientations (horizontal and vertical polarization). Several fluidic channels are placed beneath/above the conducting layers. The transmission behaviour of the unit cell can be changed by altering the geometrical parameters which is achieved by injecting the liquid metal into the channels. More than 300° phase shift range with a maximum S21 of ∼ −1.5 dB at 3.3 GHz is obtained. It exhibits 3 dB of insertion loss over a bandwidth ranging from 3.2 to 3.43 GHz. It is the first time that a transmitarray unit cell, reconfigured employing liquid metal, provides a combination of low insertion loss and large phase shift range. The proposed prototype was fabricated and measured within an open‐ended waveguide and the measured results agree well with the simulations and verify the effectiveness of the design. The reconfigurable transmitarray unit cell can be used to design beam‐scanning arrays, as well as for applications in wireless communications.

Reconfigurable Phase Planar Transmitarray Unit Cell for Mm-Wave Communication

Folded Transmitarray Antenna Via Independent Amplitude/Phase Control with Low Side-Lobe for Millimeter-Wave Communication

Electronically Reconfigurable Unit Cell for Transmit-Reflect-arrays in the X-band

Wideband Reconfigurable Reflectarray Based on Reflector-Backed Second-Order Bandpass Frequency Selective Surface

One‐bit Wideband Reconfigurable Reflectarray with Stable Beam‐scanning Gain for X‐band Application

Design of a 2.5-D 2-Bit Reconfigurable Transmitarray Element for 5G Mmwave Applications

A reconfigurable transmitarray unit cell employing liquid metal

An mmWave FZP-Based Phased Array

Design of a Wideband Reconfigurable Transmitarrray Element Using a Novel Phase Shifter with Varactors and PIN Diodes

1-Bit Wideband Reconfigurable Transmitarray Unit Cell Based on PIN Diodes in Ku-Band

Wideband Transmitarray Unit-Cell Design With 1-Bit Phase Control and Twistable Polarization

Design of a binary programmable transmitarray based on phase change material for beam steering applications in D-band

A New 1 Bit Electronically Reconfigurable Transmitarray

A Wideband Transmitarray Using Triple-Layer Elements Combined with Cross Slots and Double Square Rings

A Multi-bit Reconfigurable Transmitarray Design Approach Using Cascaded Spatial Phase Shifters

A Reconfigurable Planar Fresnel Lens for Millimeter-Wave 5G Frontends

Port reconfigurable phase-change resonator

Analysis of the Transmission Performance Limits for a Multilayer Transmitarray Unit Cell

A 65nm CMOS 140 GHz 27.3 Dbm EIRP Transmit Array with Membrane Antenna for Highly Scalable Multi-Chip Phase Arrays

Wideband 1-bit reconfigurable transmission metasurface unit cell design in Ka-band with polarization hold and conversion

A Wideband Reconfigurable Intelligent Surface for 5G Millimeter-Wave Applications