Abstract:In this paper, a reconfigurable transmitarray unit cell using liquid metal is presented. It consists of three conducting layers where the geometries of the resonators, on the different layers, differ and consist of an arrow shape together with rotated split rings. It is the first time that a transmitarray unit cell, reconfigured employing liquid metal, provides a combination of low insertion loss and large phase shift range. In this paper, a reconfigurable transmitarray unit cell using liquid metal is presented. It consists of three conducting layers where the geometries of the resonators, on the different layers, differ and consist of an arrow shape together with rotated split rings. The arrow‐shaped conducting layer has the capability to convert the polarization of the incoming waves by 90°. The split ring resonators, on the upper and lower conducting layers, have the same dimensions but different orientations (horizontal and vertical polarization). Several fluidic channels are placed beneath/above the conducting layers. The transmission behaviour of the unit cell can be changed by altering the geometrical parameters which is achieved by injecting the liquid metal into the channels. More than 300° phase shift range with a maximum S21 of ∼ −1.5 dB at 3.3 GHz is obtained. It exhibits 3 dB of insertion loss over a bandwidth ranging from 3.2 to 3.43 GHz. It is the first time that a transmitarray unit cell, reconfigured employing liquid metal, provides a combination of low insertion loss and large phase shift range. The proposed prototype was fabricated and measured within an open‐ended waveguide and the measured results agree well with the simulations and verify the effectiveness of the design. The reconfigurable transmitarray unit cell can be used to design beam‐scanning arrays, as well as for applications in wireless communications.

Analysis of the Transmission Performance Limits for a Multilayer Transmitarray Unit Cell

Theoretical Study of Multilayer Ring Metamaterial Emitter for a Low Bandgap TPV Cell

A Novel Transmitarray Using Double-layer Hexagonal Element with Vias

A Wideband Transmitarray Using Triple-Layer Elements Combined with Cross Slots and Double Square Rings

A reconfigurable transmitarray unit cell employing liquid metal

Transmission phase limit of multilayer frequency-selective surfaces for transmitarray designs

Reconfigurable Phase Planar Transmitarray Unit Cell for Mm-Wave Communication

Design and Verification of a Miniaturized Multifunctional Transmitarray Unit Cell for the S-Band

Study of a low-profile transmitarray element using 3 non-identical layers

Dual-Layer Transmitarray Antenna with High Transmission Efficiency

Electronically Reconfigurable Unit Cell for Transmit-Reflect-arrays in the X-band

Dual-Layer Huygens Element Based Conformal Transmitarray with A High-Efficiency

Wideband 1-bit reconfigurable transmission metasurface unit cell design in Ka-band with polarization hold and conversion

Double-Layer Transmitarray Antenna Using Specially Designed Substrate

Analysis And Design Of Wideband Transmitarray Antennas With Different Unit-Cell Phase Ranges

SiN-SOI Multilayer Platform for Prospective Applications at 2 Μm

A New 1 Bit Electronically Reconfigurable Transmitarray

1-Bit Wideband Reconfigurable Transmitarray Unit Cell Based on PIN Diodes in Ku-Band

On the Gap Between the Amplitude and Phase Modulation Layers in a Transmitarray Collimator

Wideband Transmitarray Unit-Cell Design With 1-Bit Phase Control and Twistable Polarization

Millimeter-Wave Huygens' Transmit-Arrays based on Coupled Metallic Resonators