Abstract:A dual-frequency all-in-one Global Navigation Satellite System (GNSS) receiver with a multi-core 32-bit RISC (reduced instruction set computing) application processor was integrated and manufactured as a System-on-Chip (SoC) in a 110 nm CMOS (complementary metal-oxide semiconductor) process. The GNSS RF (radio frequency) front-end with baseband navigation engine is able to receive, simultaneously, Galileo (European Global Satellite Navigation System) E1/E5ab, GPS (US Global Positioning System) L1/L1C/L5, BeiDou (Chinese Navigation Satellite System) B1/B2, GLONASS (GLObal NAvigation Satellite System of Russian Government) L1/L3/L5, QZSS (Quasi-Zenith Satellite System development by the Japanese government) L1/L5 and IRNSS (Indian Regional Navigation Satellite System) L5, as well as all SBAS (Satellite Based Augmentation System) signals. The ability of the GNSS to detect such a broad range of signals allows for high-accuracy positioning. The whole SoC (system-on-chip), which is connected to a small passive antenna, provides precise position, velocity and time or raw GNSS data for hybridization with the IMU (inertial measurement unit) without the need for an external application processor. Additionally, user application can be executed directly in the SoC. It works in the -40 to +105 °C temperature range with a 1.5 V supply. The assembled test-chip takes 100 pins in a QFN (quad-flat no-leads) package and needs only a quartz crystal for the on-chip reference clock driver and optional SAW (surface acoustic wave) filters. The radio performance for both wideband (52 MHz) channels centered at L1/E1 and L5/E5 is NF = 2.3 dB, G = 131 dB, with 121 dBc/Hz of phase noise @ 1 MHz offset from the carrier, consumes 35 mW and occupies a 4.5 mm2 silicon area. The SoC reported in the paper is the first ever dual-frequency single-chip GNSS receiver equipped with a multi-core application microcontroller integrated with embedded flash memory for the user application program.

29.7 CCSA: A 394TOPS/W Mixed-Signal GPS Accelerator with Charge-Based Correlation Computing for Signal Acquisition

A 394-TOPS/W Matched Filter with Charge-Domain Computing for GPS Signal Acquisition

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

The High-Precisiontime System Design of Pico-Satellite Based on GPS Receiver

A 40-Mw 7-Bit 2.2-Gs/s Time-Interleaved Subranging ADC for Low-Power Gigabit Wireless Communications in 65-Nm CMOS

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

An Intelligent and Acceleration ASIC Design for High Precision Positioning and Posture Surveillance System.

The Optimized Method and Algorithms in the CPU&GPU-Based GNSS Software Receiver

A High Accuracy Time Keeping Scheme Based on GPS

Acquisition Circuit for HSGPS Receivers:Optimization and Implementation

NaviSoC: High-Accuracy Low-Power GNSS SoC with an Integrated Application Processor

Energy Efficient GPS Acquisition with Sparse-Gps

A Multi-Mode Blocker-Tolerant GNSS Receiver with CT Sigma-Delta ADC in 65nm CMOS

Modeling and Improving the Energy Performance of GPS Receivers for Mobile Applications

A Fully Integrated Low-Power Multi-Mode RF Receiver for BDS-3/GPS

An 8 Bit 12 MS/s Asynchronous Successive Approximation Register ADC with an On-Chip Reference

A Dual-Channel Compass/GPS/GLONASS/Galileo Reconfigurable GNSS Receiver in 65 Nm CMOS with On-Chip I/Q Calibration.

An Asymmetric Dual-Channel Reconfigurable Receiver For Gnss In 180nm Cmos

Efficient Chip-Shape Correlator Implementation on a GPU-based Real-Time GNSS SDR Receiver

An area-efficient dual-channel RF receiver for GPS-L1/Galileo-E1/Compass-B1

Hard SyDR: A Benchmarking Environment for Global Navigation Satellite System Algorithms