Abstract:China's total carbon emissions are approximately 11 billion tons,with around 40%of CO2 being produced by the coal-fired power plants(CFPP).Therefore,reducing carbon emissions from the CFPP is critical in achieving the Dual-Carbon target.This paper focused on the advancements in the low-carbon/carbon-neutral fuel substitution technologies(such as biomass,sludge,hydrogen/ammonia,etc.)and the CCUS(carbon capture,utilization and storage).The CFPP coupled with biomass includes direct and indirect coupling,but are subject to the supply and price of biomass feedstock.To address these challenges,a comprehensive"planting-harvesting-transportation-storage-pretreatment-combustion"ap-proach was recommended to ensure an effective control throughout the entire chain.Initial pilot test on a 660 MW CFPP revealed a substantial reduction in CO2 emissions by 772500 tons annually.The high-water content of municipal sludge,reaching up to 80%,necessitates drying prior to entering the boiler.Current steam drying and flue gas drying technologies entail substantial investment and operational costs,with the dried sludge still retaining high water content and associated problems such as odor.Consequently,the blending ratio in the CFPP remains below 8%.A sludge carbonization techno-logy based on a biomass heat source can address these challenges,which allows for the direct production of odorless sludge char in sewage plants with a calorific value of about 10.26 MJ/kg.This technology enables an increased blending ratio in the CFPP to 20%-30%,thereby significantly reducing coal consumption and CO2 emissions.The blending of hy-drogen/ammonia necessitates addressing the issues of ammonia escape and NOx emission under high blending ratios.Ex-periments for co-firing of coal and ammonia were conducted on 300 MW and 600 MW CFPP in China to address the chal-lenges of ammonia escape and NOx emissions under high blending ratios.The results showed that combustion control can achieve a higher NH3 burn-up rate with a slight increase in NOx emissions.However,the commercialization of hydrogen/ammonia blending in the CFPP is constrained by the cost of hydrogen and ammonia.The commercialization of pre-combustion decarbonization technology,such as IGCC,faces significant limitations due to high costs.Several foreign demonstration projects were discontinued.The construction costs and equipment reliability are crucial for promoting the commercialization of this technology.Carbon capture technologies in combustion processes include oxygen-enriched combustion and chemical chain combustion.The power generation efficiency of atmospheric oxyfuel combustion is lower by 8%-12%compared to air combustion due to the energy consumption associated with air separation and recycling pro-cesses.Transitioning from atmospheric oxyfuel combustion to pressurized oxyfuel combustion can further increase the net power generation efficiency.Notably,China has constructed the world's largest 4 MW chemical-looping combustion(LCL)demonstration plant.The LCL also has a potential application in the gasification industry.Post-combustion carbon capture predominantly employs the solution absorption technology,while the solid adsorption technology offers a lower regeneration energy consumption.However,some challenges remain in reducing energy consumption and costs to facilit-ate the large-scale commercialization of this technology.

Tail-Pipe Clean-Air Technologies

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Advances in Air Pollution Control for Vessels in China

Pollutant Control by Catalytic Methods

TECHNOLOGIES OF NO_X EMISSION CONTROL FOR COAL-FIRED POWER PLANTS

Technologies for air pollution control

Integrated removal and ultra-low emission of multiple pollutants for coal-fired power plants

Advances in Carbon Control Technologies for Flue Gas Cleaning

An Advanced, Ammonia-Based Combined NOx/SOx/CO2 Emission Control Process Towards a Low-Cost, Clean Coal Technology

Coal combustion and its pollution control in China

Smart solutions for clean air: An AI-guided approach to sustainable industrial pollution control in coal-fired power plant

Development Of Multi-Pollutants Control Technology For Flue Gas From Power Plants In China

APPLICATION OF NANOTECHNOLOGY IN POLLUTION CONTROL OF NOx FROM STATIONARY SOURCES

Technology Development and Cost Analysis of Multiple Pollutant Abatement for Ultra-Low Emission Coal-Fired Power Plants in China

Progress in Low Carbon Technologies for Large-Scale Coal-Fired Power Plants

Progress and Prospects on Clean Coal Technology for Power Generation

Research and Application Analysis on the Pollution Control of Tail Gas Emissions from Co2 Capture Absorber

Technological solutions for air pollution control to mitigate climate change: an approach to facilitate global transition toward blue sky and net-zero emission

Co-Control of Local Air Pollutants and Co2 from the Chinese Coal-Fired Power Industry

Use of plants to clean polluted air: A potentially effective and low-cost phytoremediation technology

Emission and Control of Flue Gas Pollutants in CO2 Chemical Absorption System – A Review