Abstract:MiniCACTUS is a monolithic sensor prototype optimised for timing measurement of charged particles. It has been designed in a standard 150 nm CMOS process without dedicated amplification layer. It is intended as a demonstrator chip for future large scale timing detectors, like upgrades of timing detectors at LHC, or future high energy physics detector projects. The sensor features an active array of 2 x 4 diodes, analog and digital Front-Ends (FEs), a slow control interface, and bias circuitry programmable through internal DACs. The sensing element is a deep n-well/p-substrate diode. Thanks to the optimized guard-rings surrounding the whole chip, it is possible to apply safely more than 450 V on the high-resistivity substrate allowing fast charge collection. The baseline pixel dimensions are 1.0 mm x 1.0 mm and 0.5 mm x 1.0 mm. The analog FEs and the discriminators for each pixel are implemented outside the pixel, at the column level. The power consumption is approximately 300 mW/cm$\mathbf {^2}$, which is compatible with cooling infrastructure available at LHC experiments, and making integration of this concept viable in future high energy physics experiments. After fabrication, the sensors have been thinned to 100 $\mu$m, 200 $\mu$m and 300 $\mu$m total thickness and then post-processed for backside biasing. The time resolution of several sensors with different thicknesses has been measured in 3 test-beam campaigns using high energy muons (Minimum Ionizing Particles) at CERN SPS in 2021 and 2022. A resolution of 65.3 ps has been measured with on-chip FE and discriminator. This paper will focus on the results of these test-beam campaigns.

A high time resolution and high dynamic range ASIC for the micro-vertex detector in the PANDA experiment

MiniCACTUS-V2: AHEP ASIC Prototype for 50ps Time Resolution

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

An Energy and Time Measurement ASIC for Large Pixel Semiconductor Detectors for Spectroscopic and Imaging Applications

20 ps Time Resolution with a Fully-Efficient Monolithic Silicon Pixel Detector without Internal Gain Layer

Data Acquisition System for CEPC Vertex Detector Prototype

Design of High-Precision Time Measurement Prototype ASIC for the LGAD Readout

A Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Characterization of the radiation tolerant ToASt ASIC for the readout of the PANDA MVD strip detector

MiniCACTUS: A 65 ps Time Resolution Depleted Monolithic CMOS Sensor

Development of Fast and High Precision CMOS Pixel Sensors for an ILC Vertex Detector

Development of a Pixel Readout ASIC for CZT Detectors for Spectral X-ray Photon-Counting Imaging Applications

A monolithic ASIC demonstrator for the Thin Time-of-Flight PET scanner

A Front-End ASIC for Semiconductor Radiation Detectors with Pile-up Rejection Capability

An Analog Front-end ASIC Design for 16-Channel SiPM Readout in PET Detectors

50.3 ps time resolution and an 11-channel time measuring chip for Topmetal detectors

Characterization of the first prototype CMOS pixel sensor developed for the CEPC vertex detector

Two HVCMOS active pixel ASIC designs for the Measurement of GCR and SEP with a combined dynamic range of >80 dB

The data acquisition system for the PANDA Micro-Vertex Detector

An Asynchronous Data-Driven Readout Prototype For Cepc Vertex Detector

Development of a Multi-Channel ASIC with Individual Energy and Timing Digitization for SiPM Detectors for TOF-PET Applications