Residual Load-Carrying Performance of CFRP Strengthened RC Beam after Drop Hammer Impact

Jingfeng Zhang,Junlin Wu,Wei Du,Chaokang Tong,Zhihui Zhu,Yuan Jing

DOI: https://doi.org/10.1016/j.ijimpeng.2023.104547

IF: 4.592

2023-01-01

International Journal of Impact Engineering

Abstract:Carbon fiber reinforced polymer (CFRP) external bonding is a common approach to strengthen the bearing ca-pacity of the reinforced concrete (RC) members. In this study, two types of RC beams, i.e., CFRP strengthened beam and conventional RC beam, were tested under drop hammer impact and subsequent quasi-static loading. The strengthening effect of the CFRP on the dynamic responses, failure modes and residual load-carrying per-formance of the RC beams were fully investigated. Then, a high-resolution explicit numerical simulation was conducted to further investigate the residual load-carrying mechanism of the CFRP strengthened beam. The experimental results demonstrate that even though the CFRP sheet peels off from the soffit of the investigated beam instantaneously upon impact, which provides a little contribution to the impact damage elimination in the mid-span of the beam, the oblique cracks within the flexure-shear zone were reduced moderately. Further, the bonded CFRP sheet can effectively reduce the maximum and residual displacement of the beam and improve the recovery performance of deformation. In addition, the residual resistance, residual stiffness and post-impact energy absorption capacity of the beams with CFRP are shown to be higher than those of the unstrengthened ones. The experimental and numerical results both show that the effective anchoring approach has an important effect on the residual loading performance enhancement. Larger impact energy and more significant impact dynamic effect tend to degrade the bearing performance of the beam more.