Abstract:According to California's 2016 Building Energy Efficiency Standards, the percentage flicker of light-emitting diode (LED) lighting fixtures should be below 30%. However, the percentage flicker of commercially available linear power supplies is generally between 25% and 99.9%; thus, some LED lighting fixtures that use linear power supplies have been unable to enter the European or American markets. The traditional method of effectively reducing flicker involves increasing the capacitance of the electrolytic capacitor of the power supply, which causes an increase in the height of the lamp board components as well as shadowing and dark band phenomena. This paper presents a power supply circuit that uses only electrolytic capacitors with low capacitance and exhibits constant power, constant light output, and a lamp board thickness of only 8 mm; it can achieve a percentage flicker of less than 10%, which exceeds international standards. Power efficiency is a crucial performance indicator of linear power supplies. Because linear power supplies are mostly integrated circuits (ICs) with extremely small package volumes, higher power efficiency results in lower heat loss. The international standard for the power efficiency of linear power supplies is approximately 75%. A multistage switching mechanism is used in the proposed power supply to achieve an overall efficiency of > 88%. Under an input power of 12 W, a 10% increase in efficiency reduces the heat by 1.2 W, which can considerably reduce the difficulty and cost of heat dissipation in IC packages. By combining the aforementioned technologies, the proposed power supply can achieve high efficiency and low percentage flicker, thereby improving the shortcomings of traditional linear power supplies. Currently, the driver-on-board (DO- ) module of the proposed power supply is in the trial production phase, and its market entry will be accelerated to expand the market share of linear power supplies.

High-voltage Linear LED for Three-phase AC Power Applications

High-reliability and High-Efficiency White LED Driver with High Voltage Supply

An Electrolytic-Capacitorless And Inductorless Ac Direct Led Driver With Power Compensation

A High-Voltage LED Driver Using SOI Technology

High-voltage LED Driver Based on SOI Process

A Capacitorless and Low‐Optical‐Flicker AC Direct LED Driving IC and System Applied to Street Lighting

A Staby and Design of the High Effideney and Nigh Voltage Driver of the White Light LED

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

A Linear Constant Current LED Driver with No Off-Chip Inductor or Capacitor

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

Novel Pulsating-DC High-Voltage Linear Driving Scheme for GaN LED General Lighting

Design of a LED Driver Applied for TRIAC Dimmers with Primary Constant Current Control

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

State-of-the-art multiple outputs high brightness (HB) LED driving technology

High input voltage single-stage flyback AC/DC LED driver using series-connected MOSFETs

A 3 W High-Voltage Single-Chip Green Light-Emitting Diode with Multiple-Cells Network

A Primary-Side Control Scheme for High-Power-Factor LED Driver With TRIAC Dimming Capability

An AC-DC LED Integrated Streetlight Driver with Power Factor Correction and Soft-Switching Functions

Thermal performance testing for high power light-emitting diode based on voltage-current characteristics with pulse injection

Ultra-Low Percentage Flicker High-Efficiency Direct AC LED Driver Using Constant Power Technology

A Novel Integrated Electronic Lighting Driver Circuit for Supplying an LED Projection Lamp with High Power Factor and Soft Switching Characteristics