Cavitation and Acoustic Analysis of Sleeve Steam Trap under Multiple Working Conditions

QIU Chang,YU Longjie,QIAN Jinyuan,JIN Zhijiang

DOI: https://doi.org/10.3969/j.issn.1674-8530.21.0071

2023-01-01

Abstract:Aiming at the common cavitation and acoustic problems in the steam trap, a new type sleeve valve was designed. Based on the RANS equation, the Mixture multiphase flow model and the cavitation model, the cavitation flow in the control valve was numerically simulated. Then, based on the time-averaged turbulent flow field information and the broadband noise model, the noise acoustic power distribution characteristics were calculated. Finally, the noise acoustic powers for the control valve in cavitation and non-cavitation conditions were compared and analyzed. The results show that the cavitation in the steam trap mainly occurs at the orifice of the sleeve. The cavitation intensity in the valve increases with the increase of the inlet flow velocity. The critical flow velocity of cavitation in the valve is 2.5 m/s. When the inlet flow velocity is lower than 2.5 m/s, cavitation does not occur in the valve. The main noise sources in the valve are concentrated in the high-velocity cavitation region of the sleeve orifice and the vortex area at the annular wall surface and the bottom surface of the valve chamber. The cavitation intensity is the main factor that determines the maximum acoustic power at the sleeve. The maximum acoustic power of the sound source at the sleeve can be effectively reduced by suppressing the cavitation degree at the sleeve.