Abstract:Carbon fiber-reinforced silicon carbide (C/SiC) composites are important candidates for laser protection materials. In this study, ablation mechanism of C/SiC coated with ZrO2/Mo and ZrB2-SiC/ZrO2/Mo under laser irradiation was studied. ZrB2-SiC multiphase ceramic and ZrO2 ceramic were successfully coated on C/SiC composite by atmospheric plasma spraying technology with Mo as transition layer. Phase evolution and morphology of composite were investigated by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Moreover, ablation behavior of the composite was investigated by laser confocal microscopy. Results showed that ablation mechanism of C/SiC composite was controlled by phase transformation, thermal reaction, and thermal diffusion, with solid-liquid transition of ZrB2 and ZrO2 being dominant factor. Endothermic reaction and good thermal diffusivity of coatings were also important factors affecting ablation performance. Reflectivity effect of ZrO2 coating was limited under high-energy laser irradiation. Compared with ZrO2/Mo single-phase-monolayer coating, designed ZrB2-SiC/ZrO2/Mo coating showed better ablation performance, and breakdown time of C/SiC increased from 10 to 40 s. The depletion of liquid phase in molten pool was identified as an important factor responsible for rapid failure of C/SiC. The coating failed when the entire liquid phase was consumed within molten pool, followed by rapid damage of C/SiC substrate. Results of this study can provide theoretical guidance and research ideas for design and application of laser protective materials.

Laser Ablation Mechanism of ZrC-SiC-MoSi2 Ternary Ceramic Modified C/C

Laser ablation behavior and mechanism of C/SiC coated with ZrB2 –MoSi2–SiC/Mo prepared by HVOF

Laser Ablation Resistance and Mechanism of Si-Zr Alloyed Melt Infiltrated C/C-SiC Composite

Ablation Behavior of C/SiC with YSZ and ZrB2 Coatings under High-Energy Laser Irradiation

Laser Ablative Behavior of C/C Modified by Si Reactive Infiltration

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Laser Ablation Behaviors of SiC–ZrC Coated Carbon/carbon Composites

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

Ablation Behavior of Zr–Al(Si)–C Layered Carbides Modified 3D Needled C/SiC Composites

Study on Ablation Behavior and Mechanism of C/SiC Composite Irradiated by a Laser with Various Parameters

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Ablation in Different Heat Fluxes of C/C Composites Modified by ZrB2–ZrC and ZrB2–ZrC–SiC Particles

Evaluation of Ablation Resistant ZrC-SiC Multilayer Coating for SiC Coated Carbon/carbon Composites under Oxyacetylene and Laser Conditions

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Effect of Reaction Melt Infiltration Temperature on the Ablation Properties of 2D C/C–SiC–ZrC Composites

Microstructure and Ablation Behavior of SiC Coated C/C–SiC–ZrC Composites Prepared by a Hybrid Infiltration Process

Laser ablation behavior and mechanism of Cf/SiC–ZrC ultra-high temperature ceramic matrix composite prepared by PIP method

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

The mechanical properties of C/C-ZrC-SiC composites after laser ablation