Abstract:A commercial scale Mg-7Gd-2Y-1Zn-0.5Zr alloy extrusion rod with synergetic high yield strength of 350 MPa and fracture toughness KIC of 22.4 MPa m(1/2) was fabricated by direct-chill casting, hot extrusion and subsequent aging treatment at 200 C for 108 h. The microstructures and mechanical properties of the as-extruded and peak aged alloys were investigated, and the fracture toughness and fracture mechanisms before and after aging treatment were also analyzed. The results showed that the as-extruded alloy consisted of long period stacking ordered (LPSO) phase and bimodal matrix microstructure composed of fine dynamic recrystallized (DRXed) grains and coarse deformed grains. Microstructural analysis near fracture surfaces indicted that twinning was activated in the coarse deformed grains during fracture toughness test, which may be conducive to the improvement of the fracture toughness of the alloys. The lamellar-shaped LPSO phases enhanced the fracture toughness since the formation of secondary cracks parallel to the lamellar LPSO can cause significant energy dissipation and deflection of main crack. The micro-cracks were initiated and propagated in the bulk LPSO phases, which may deteriorate the fracture toughness. Large amount of nano beta' phase precipitated in the T5 peak-aged alloy significantly improved the strength of the alloy. Fractography analysis indicated that fracture mechanism changed from ductile fracture of the as-extruded alloy to quasi-cleavage fracture of the peak-aged alloy. The precipitation of beta' would suppress twin growth and induce the microcracks initiated at the DRXed grain boundaries and in the deformed grains, which led to slight decrease of KIC.

Preliminary Investigations about Effects of Aging Method on Microstructure and Tensile Properties of As-Eextruded Mg-Gd-Y-Mn-Based Magnesium Alloys

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

A Preliminary Study on the Effects of Aging Temperature on the Microstructure and Mechanical Properties of As-Extruded Mg-12Gd-4Y-1Zn Magnesium Alloy

Effects of Aging on the Microstructures and Mechanical Properties of Extruded Am50+Xca Magnesium Alloys

Effect of Microstructures and Texture Development on Tensile Properties of Mg–10Gd–3Y Alloy

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Effect of Ageing Treatment on the Microstructure, Texture and Mechanical Properties of Extruded Mg–8.2Gd–3.8Y–1Zn–0.4Zr (wt%) Alloy

Effects of pre-aging on microstructure evolution and deformation mechanisms of hot extruded Mg–6Zn–1Gd–1Er Mg alloys

Effects of Heat Treatment on Microstructure and Mechanical Properties of Extruded AM50+xCa Magnesium Alloys

Effects of Aging Processes on the Dynamic Impact Mechanical Behavior of Mg-Gd System Alloys

Effect of Aging Treatment on the Microstructure, Fracture Toughness and Fracture Behavior of the Extruded Mg-7Gd-2Y–1Zn-0.5Zr Alloy

Effect of Aging Temperature on Microstructure and Mechanical Properties of Mg-12Gd-3Y-1Sm-0.5Zr Alloy

Effect of heat treatment on microstructure and mechanical properties of Mg-12Gd-Y-0.5Zr alloy cast by metal mould

Effects of Ageing Treatment on Microstructures and Properties of Mg–Gd–Y–Zr Alloys with and Without Zn Additions

Effect of Aging Treatment on Tensile Behaviors of Cast Mg-9Gd-4Y-0.5Zr Alloy

Mechanical Properties and Microstructure Evolution of Mg-Gd Alloy During Aging Treatment

Effects of heat treatment on microstructure and properties of Mg-12Gd-3Y-Sm-0.5Zr alloy

Synergic Effects of Gd and Y Contents on the Age-Hardening Response and Elevated-Temperature Mechanical Properties of Extruded Mg–Gd(-Y)-Zn-Mn Alloys

Effect secondary deformation on microstructures and mechanical properties of Mg-6Gd-3.2Y-xZn-0.5Zr extruded sheet