Abstract:Titanium alloys have high specific strength and excellent corrosion resistance and have been applied in deep-sea engineering fields. However, stress corrosion cracking may become one of the biggest threats to the service safety of a high-strength titanium alloy, as well as its weldment. In this work, stress corrosion cracking of a gas-tungsten-arc-welded Ti-6Al-3Nb-2Zr-1Mo (Ti6321) alloy influenced by the applied potentials in simulated deep-sea and shallow-sea environments was investigated by combining slow strain rate testing with electrochemical measurements. The results showed that the service environment and applied potential have a substantial effect on the stress corrosion cracking behavior of the Ti6321 welded joint. The Ti6321 welded joint exhibited higher stress corrosion susceptibility in a simulated deep-sea environment and at a strong polarization level owing to the diminishing protection of the passive film under passivation inhibition and the enhancement of the hydrogen effect. The fracture of a Ti6321 welded joint in the weld material could be attributed to the softening effect of the thick secondary α within the coarse-grained martensite. The electrochemical evaluation model of stress corrosion cracking susceptibility of a Ti6321 welded joint in a simulated marine environment was established by adding the criterion in the passivation region based on the literature model, and four potential regions corresponding to different stress corrosion cracking mechanisms were classified and discussed. Our study provides useful guidance for the deep-sea engineering applications of Ti6321 alloys and a rapid assessment method of stress corrosion risk.

Synergistic Effects of Hydrostatic Pressure and Dissolved Oxygen on the SCC Behavior of Hydrogenated Ti6Al4V Alloy in Deep-Sea Environment

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

A Primary Study of the Effect of Hydrostatic Pressure on Stress Corrosion Cracking of Ti-6Al-4V Alloy in 3.5% NaCl Solution

Electrochemical Evaluation of Stress Corrosion Cracking Susceptibility of Ti-6Al-3Nb-2Zr-1Mo Alloy Welded Joint in Simulated Deep-Sea Environment

Stress corrosion behavior and mechanism of Ti6321 alloy in seawater with different dissolved oxygen concentrations

Effect of hydrogen charging on SCC of 2205 duplex stainless steel with varying microstructures in simulated deep-sea environment

Effect of Hydrogen Charging on the Stress Corrosion Cracking Behavior of X70 Steel in Simulated Deep Seawater Environment

Hydrogen effects on passivation and SCC of 2205 DSS in acidified simulated seawater

The effect of hydrogen on stress corrosion behavior of X65 steel welded joint in simulated deep sea environment

Study on the roles of bisulfite in the stress corrosion cracking of 7050-T7451 aluminum alloy in the thin electrolyte layer environment

Stress corrosion cracking of the titanium alloys under hydrostatic pressure resulting from the degradation of passive films

Diffusible Hydrogen Facilitated Stress Corrosion Cracking in 316 Stainless Steel Using In-Situ Gaseous Hydrogen Charging in Simulated PWR Environment

Combined effect of hydrogen embrittlement and corrosion on the cracking behaviour of C110 low alloy steel in O2-contaminated H2S environment

Electrochemical Hydrogen Charging on Corrosion Behavior of Ti-6Al-4V Alloy in Artificial Seawater

Effects of alternating dissolved oxygen and dissolved hydrogen on the corrosion behavior of alloy 52 in high temperature high pressure water

Study on corrosion, hydrogen permeation, and stress corrosion cracking behaviours of AISI 4135 steel in the tidal zone

Influence of AC/DC on stress corrosion cracking of Ti-6Al-3Nb-2Zr-1Mo alloy in simulated marine solution

Stress corrosion cracking behavior and mechanism of Fe-Mn-Al-C-Ni high specific strength steel in the marine atmospheric environment

Electrochemical corrosion behavior of high strength steel in simulated deep-sea environment under different hydrostatic pressure

Effect of dissolved oxygen and hydrogen on the stress corrosion cracking behavior of alloy 600 in high temperature water

Hydrogen embrittlement susceptibility of Ti-6Al-4V alloys fabricated by electron beam melting in simulated deep-sea environment