Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Study on Seismic Behavior of CHS T-joints under Quasi-Static Cyclic In-Plane Bending

Hysteretic Behavior of CHS X-joints under In-Plane Bending Moment

Behaviour of SHS Brace-H-shaped Chord T-joints under Cyclic In-Plane Bending

Behavior of Thick-Walled Chs X-Joints under Cyclic Out-Of-Plane Bending

Design of concrete filled tubular CHS T-joints under in-plane bending

Behaviour of Chs Brace-To-H-Shaped Chord X-Joints under In-Plane Bending

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental and numerical study on static behaviour of uniplanar CFDST-CHS T-joints

Experimental study on the hysteretic behavior of T-type SHS joints

Hysteretic behaviour of SHS brace-H-shaped chord T-joints with transverse stiffeners

Mechanical Behaviour of Concrete-Filled CHS Connections Subjected to In-Plane Bending

Influence of Brace-to-chord Angle on the Seismic Behavior of Circular Hollow Section X-joints under In-Plane Bending

Behaviour Of Concrete-Filled Tubular T-Joints Under In-Plane Bending Cyclic Loading

Effect of Loading Patterns on In-Plane Flexural Hysteretic Performance of CHS X-connections

Concrete-Filled Steel and Steel Tubular T-Joints under Cyclic In-Plane Bending

Seismic performance of CHS X-connections under out-of-plane bending

Tests of CHS T-joints with Convex Chord under Axial Compression

Axial Capacity of CHS T-Joints Reinforced with Welded External Stiffeners Under Load

Experimental evaluation of CHS KK-joints under out-of-plane bending for seismic applications

Study of energy dissipation mechanism of concrete-filled steel tubular T-joints

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints