Abstract:This paper presents experimental and numerical investigations on empty and concrete-filled circular hollow section (CHS) X-joints with curved chord under out-of-plane bending. A total of 16 specimens were fabricated by hot-rolled bending the chord members into curvature with three different radii to apply out-of-plane bending to the brace members, in which 6 specimens were tested with empty curved chord, 6 specimens were tested with concrete filled in the curved chord only, and 4 traditional empty and concrete-filled CHS X-joints with straight chord were also tested for comparison. The typical failure modes, axial load-vertical displacement curves, bending moment-chord deformation curves, bending moment-rotation curves and strain distribution curves of all specimens are reported. The effects of curvature radius of chord member and concrete filled in the chord member on the joint strength and behaviour under out-of-plane bending were evaluated. It is shown from the comparison that the ultimate strengths of the CHS X-joints with curvature radius of chord less than 12d(0) under out-of-plane bending are closer to those of the traditional CHS X-joints with straight chord with the increase of the curvature radius of chord member. Whereas, the ultimate strengths of the CHS X-joints with curvature radius of chord less than 12d(0) under out-of-plane bending are generally similar to those of the traditional CHS X-joints with straight chord. Furthermore, the out-of-plane flexural behaviour of CHS X-joints are improved with the increase of the p ratio. Whereas, filling the concrete in the chord member cannot enhance the ultimate strengths of CHS X-joints under out-of-plane bending. The joint strengths obtained from the experimental investigation are compared with the design strengths calculated using the current design rules for traditional CHS X-joints with straight chord under out-of-plane bending, which were demonstrated to be quite conservative. In addition, the corresponding finite element analysis was also performed and calibrated against the test results. The design equations are proposed based on the test and numerical results for empty and concrete-filled CHS X-joints with curved chord under out-of plane bending, which were verified to be more accurate. (C) 2017 Elsevier Ltd. All rights reserved.

Experimental evaluation of CHS KK-joints under out-of-plane bending for seismic applications

Mechanical Behaviour of Concrete-Filled CHS Connections Subjected to In-Plane Bending

Mechanical Behaviour and Design of Concrete-Filled K and KK CHS Connections

Experimental study of the static behavior of tubular N-joints

Experimental Study On Seismic Behavior Of Innovative Multi-Cellular Cft-Walls With Tie-Bolts

Design of concrete filled tubular CHS T-joints under in-plane bending

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Flexural Behaviour of Concrete-Filled CHS X-joints with Curved Chord under Out-of-plane Bending

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Tests of Steel and Composite Chs X-Joints with Curved Chord under Axial Compression

Tests of CHS T-joints with Convex Chord under Axial Compression

Behaviour of Chs Brace-To-H-Shaped Chord X-Joints under In-Plane Bending

Behaviour of CFDST chord to CHS brace composite K-joints: Experiments

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Axial Capacity of CHS T-Joints Reinforced with Welded External Stiffeners Under Load

Analytical Behaviour of CFDST Chord to CHS Brace Composite K-joints

Flexural performance study of the CHC joint based on experimental methods

Behaviour Of Concrete-Filled Tubular T-Joints Under In-Plane Bending Cyclic Loading

Concrete-Filled Steel and Steel Tubular T-Joints under Cyclic In-Plane Bending

Punching shear failure of concrete-filled steel tubular CHS connections