Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Flexural performance study of the CHC joint based on experimental methods

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Experimental Study on Edge Cell Partially-Replaced Joint for I-beam to Multi-Celled CFST Walls under Cyclic Loading

Behaviour and design of prefabricated connections under combined bending and compression for free-form grid structures

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Mechanical Behaviour of Concrete-Filled CHS Connections Subjected to In-Plane Bending

Design of concrete filled tubular CHS T-joints under in-plane bending

Experimental Study on Tensile Fracture Mechanism of Butt Joints in Multi-Celled CFST Walls

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Application of high-strength strain-hardening cementitious composites (SHCC) in the design of novel inter-module joint

Flexural performance of rigid joints for diaphragm walls: Experimental investigation and numerical analysis

Experimental and Numerical Studies on the Mechanical Performance of a Wall-beam-strut Joint with Mechanical Couplers for Prefabricated Underground Construction

Experimental study on CFRP reinforcement and static performance of CHS KT-joints

Joints mechanical characteristics of prefabricated subway station considering bending stiffness difference

Ultimate Bearing Capacity of CHS X-joints Stiffened with External Ring Stiffeners and Gusset Plates Subjected to Brace Compression

Flexural Behavior of Precast UHPC Segmental Beams with Unbonded Tendons and Epoxy Resin Joints

Experiments on the seismic performance of Y-shape joints of subway stations built by enlarging two parallel shield tunnels