Abstract:This paper studies the length effect on fatigue life of longitudinal element at the macroscale. An asymptotic weakest-link Weibull phenomenological model that incorporates a statistical length effect for the fatigue life of longitudinal element is proposed in this research. In the proposed model, the weakest-link effect gradually becomes dominant and causes a decrease in fatigue life that increases along (L) over cap, the normalized length of the longitudinal element. To this end, the fatigue life under a specified stress range is divided into 3 zones according to the normalized length (L) over cap: (1) (L) over cap <= 1 is the zone where length effects can be ignored, and the fatigue life can be treated as a random variable; (2)1 < <(L)over cap> < <(L)over cap>(rho) is the zone where the fatigue life is length dependent and (3) (L) over cap >= (L) over cap (rho) is the zone where the fatigue life follows asymptotic length dependence. The asymptotic threshold normalized length, (L) over cap (rho), can be evaluated by the asymptotic weakest-link Weibull model. To validate the proposed model, 3 previously published datasets are used: (1) the fatigue data of Picciotto yarn, (2) hipo-eutectoid steel wire with different lengths, and (3) the fatigue data of high-strength steel wire with different lengths and different constant stress ranges. Finally, the results obtained by the proposed model are compared with those from the literature and discussed in detail. The analytical solutions obtained using the proposed model allows for assessment of the fatigue life of certain components and structures that are beyond current testing capabilities. In particular, the length effects on the fatigue life of the high-strength steel wire in stay cables are investigated to gain insight into issues regarding safe designs.

Analysis of Stop-Hole Effects on Mode I-II Fatigue Crack Behavior for Q420 Steel Using Experiments, FEM and Variable Length RNN Approaches

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Retardation Effect on Sheet Steel under a Mixed I–II Mode Overload Revealed by Experiment, DIC and FEM Methods

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

The Retardation Effect of Combined Application of Stop-Hole and Overload on Sheet Steel

Analysis of Fatigue Crack Growth under Mixed-Mode Loading Conditions for a Pearlitic Grade 900A Steel Used in Railway Applications

Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors

The finite element simulation of fatigue crack growth of a number of collinear holes on MSD finite plate based on FRANC2D/L

Evaluation of Size Effect on Strain-Controlled Fatigue Behavior of a Quench and Tempered Rotor Steel: Experimental and Numerical Study

Retardation mechanisms and modeling of fatigue crack growth of a high-strength steel after single overload

Microstructure evolution and very-high-cycle fatigue crack initiation behavior of a structural steel with two loading intermittence modes

Evaluation of Size Effect in Low Cycle Fatigue for Q&T Rotor Steel

Geometric discontinuity effect on creep-fatigue behaviors in a nickel-based superalloy hole structure considering ratcheting deformation

An Improved Prediction Model on Fatigue Crack Growth Rate under Variable Amplitude Loads for Metallic Materials

Probabilistic Control Volume Method for Evaluating the Effects of Notch Size and Loading Type on Fatigue Life

Data-driven Fatigue Life Prediction of Small-Deep Holes in a Nickel-Based Superalloy after a Cold Expansion Process

Study of fatigue crack propagation on modified CT specimens under variable amplitude loadings using machine learning

Probabilistic Model for Length Effect on Fatigue Life of Longitudinal Elements

Numerical simulation of distortion-induced fatigue crack growth using extended finite element method

INITIATION AND PROPAGATION OF FATIGUE CRACK INEDGE REGION OF HOLE IN A SHEET WITH CENTRAL HOLE

Experimental and Numerical Studies on Fatigue Crack Propagation of Surface Cracks in Heat-Resistant Steel CrMoCoV Considering Closure Effect