Abstract:Abstract In this paper, the influence of air film holes on the stress distribution of nickel-based single-crystal superalloy blades is investigated, a simulated test piece is designed for the analysis and test of the stress distribution of air film holes, and a method of quantitative inverse inference of the stress at the edge of the air film holes is proposed. Finite element simulation of high circumferential vibration fatigue of the simulated test piece was carried out by ANSYS to obtain the gradient of stress distribution at the hole edge. The EBSD technique was used to measure the dimensions of the plastic zone in the region near the fracture, and the quantitative fatigue stresses were extrapolated using a crack tip plastic zone model with Tresca yield criterion. The compressive stress exerted by the femtosecond laser perforation method on the air film aperture wall was detected by the nanoindentation technique, and the residual stress was analysed using the S. Suresh computational model. The results of this study show that based solely on finite element simulation, it is not possible to completely simulate the effect of residual stresses caused by machining on fatigue fracture, which in turn leads to a lack of conformity between the results of finite element simulation and the results of the inverse plastic zone size extrapolation; however, the stress magnitude at the edge of the hole can be well computed by combining the stress concentration coefficients from finite element simulation with the stresses from the inverse plastic zone size extrapolation after taking into account the residual stresses from machining. The quantitative analysis results of this method have an error within 1.3 times the dispersion band compared to the test data.

The finite element simulation of fatigue crack growth of a number of collinear holes on MSD finite plate based on FRANC2D/L

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

Numerical simulation of interference of fatigue growth of co-plane cracks

The Numerical Simulation of Fatigue Crack Growth Based on FRANC2D

Quantitative Study of High-Frequency Fatigue Hole-Edge Stresses in Nickel-Based Single-Crystal Superalloy

Fatigue Growth Modeling of Cracks Emanating from a Circular Hole in Infinite Plate

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Numerical Investigation of Mixed-Mode Crack Growth in Ductile Material Using Elastic–plastic XFEM

Calculation of Stress Intensity Factor of MSD Plate with Multiple Holes As an Infinite Continuum

Phase field simulation of fatigue crack propagation under complex load situations

Numerical simulation of distortion-induced fatigue crack growth using extended finite element method

Finite Element Analysis for the Fatigue Behavior of Steel Plates Strengthened with CFRP Plates

Low-cycle fatigue crack growth in brittle materials: Adaptive phase-field modeling with variable-node elements

Numerical prediction based on XFEM for mixed-mode crack growth path and fatigue life under cyclic overload

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Numerical simulation of 3D fatigue crack growth of CT specimens

Structural Fatigue Crack Propagation Simulation and Life Prediction Based on Improved XFEM-VCCT

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Computer simulation of fatigue under diametrical compression

Analysis of Stop-Hole Effects on Mode I-II Fatigue Crack Behavior for Q420 Steel Using Experiments, FEM and Variable Length RNN Approaches

Automated Simulation of Fatigue Crack Propagation for Two-Dimensional Linear Elastic Fracture Mechanics Problems by Boundary Element Method