Abstract:An extended McEvily model for fatigue crack growth analysis of metal structures is proposed in this paper. In comparing with our previous work, the extension is mainly concerned with the following two aspects: (1) the slope of the fatigue crack growth rate curve is regarded as a variable rather than a fixed value for different materials; (2) both the maximum stress intensity factor at the crack opening level, Kop,max and the effective stress intensity factor range at the threshold level, ΔKeff,th are functions of load ratio, R and they are determined by the curve fitting method. Results indicate that the value of Kop,max tends to decrease slightly as load ratio increases where crack closure is experimentally detected. According to the present data obtained through the nonlinear least squares fitting method and discussions on the experimental results in the published literature, the parameter ΔKeff,th increases with increasing load ratios where crack closure exists and decreases at high load ratios where the experimental data are closure free. In this paper, all the parameters in the extended McEvily model are assumed to be unknown in advance and they are estimated through the curve fitting method based on the experimental data. The method is also put forward to determine material constants in the crack growth rate law based on the fitting parameters under different load ratios. Comparison between the predicted results and the corresponding experimental data with different load ratios reveals that the extended McEvily model can account for the load ratio effect reasonably well. Based on our previous work this model can also be expected to explain other fatigue phenomena.

An Improved Prediction Model on Fatigue Crack Growth Rate under Variable Amplitude Loads for Metallic Materials

Stochastic modelling of fatigue crack growth under constant amplitude loading

An Analytical Model for Fatigue Crack Propagation Prediction with Overload Effect

Fatigue crack growth prediction model under variable amplitude loading conditions

An engineering model of fatigue crack growth under variable amplitude loading

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Fatigue Life Prediction of Cracked Stiffened Plate Using the Improved Fatigue Crack Growth Rate Model

A Fatigue Crack Quantification Model for Metallic Structure Based on Strain Monitoring Data

Material-independent Stress Ratio Effect on the Fatigue Crack Growth Behavior

Fatigue life prediction model of metallic materials considering crack propagation and closure effect

A Novel Damage Model of Fatigue Life Prediction for Metallic Structures

Prediction of Fatigue Crack Initiation under Variable Amplitude Loading: Literature Review

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

An Improved Macro–micro-Two-scale Model to Predict High-Cycle Fatigue Life under Variable Amplitude Loading

A Modified Nonlinear Damage Accumulation Model for Fatigue Life Prediction Considering Load Interaction Effects

A NEW NON-LINEAR CONTINUUM DAMAGE MECHANICS MODEL FOR THE FATIGUE LIFE PREDICTION UNDER VARIABLE LOADING

The extended McEvily model for fatigue crack growth analysis of metal structures

Fatigue Crack Growth with Overload under Spectrum Loading

A Time-Based Formulation for Real-Time Fatigue Damage Prognosis under Variable Amplitude Loadings

An Improved Multiaxial Low-Cycle Fatigue Life Prediction Model Based on Equivalent Strain Approach

A Life Prediction Model for Low Cycle Fatigue Based on Continuum Damage Mechanics