Abstract:In this paper, a strain-intensity-factor-based method is proposed to calculate the fatigue crack growth under the fully reversed loading condition. A theoretical analysis is conducted in detail to demonstrate that the strain intensity factor is likely to be a better driving parameter correlated with the fatigue crack growth rate than the stress intensity factor (SIF), especially for some metallic materials (such as 316 austenitic stainless steel) in the low cycle fatigue region with negative stress ratios R (typically R = −1). For fully reversed cyclic loading, the constitutive relation between stress and strain should follow the cyclic stress-strain curve rather than the monotonic one (it is a nonlinear function even within the elastic region). Based on that, a transformation algorithm between the SIF and the strain intensity factor is developed, and the fatigue crack growth rate testing data of 316 austenitic stainless steel and AZ31 magnesium alloy are employed to validate the proposed model. It is clearly observed that the scatter band width of crack growth rate vs. strain intensity factor is narrower than that vs. the SIF for different load ranges (which indicates that the strain intensity factor is a better parameter than the stress intensity factor under the fully reversed load condition). It is also shown that the crack growth rate is not uniquely determined by the SIF range even under the same R, but is also influenced by the maximum loading. Additionally, the fatigue life data (strain-life curve) of smooth cylindrical specimens are also used for further comparison, where a modified Paris equation and the equivalent initial flaw size (EIFS) are involved. The results of the proposed method have a better agreement with the experimental data compared to the stress intensity factor based method. Overall, the strain intensity factor method shows a fairly good ability in calculating the fatigue crack propagation, especially for the fully reversed cyclic loading condition.

Material-independent Stress Ratio Effect on the Fatigue Crack Growth Behavior

An Improved Prediction Model on Fatigue Crack Growth Rate under Variable Amplitude Loads for Metallic Materials

Application of Strain Energy Based Approach for Evaluation of Fatigue Crack Growth Retardation Effect under Random Overload

An engineering model of fatigue crack growth under variable amplitude loading

On the Stress Intensity Factor of Cracks in Residual Stress Field

A Fatigue Life Prediction Method Based on Strain Intensity Factor

A Simple Engineering Approach in the Prediction of the Effect of Stress Ratio on Fatigue Threshold

Validation of an effective stress intensity factor calculation model

Probabilistic Modeling of Fatigue Crack Growth and Experimental Verification

An Energy-Equilibrium Model for Complex Stress Effect on Fatigue Crack Initiation

Improved Modeling of the Effect of R-ratio on Crack Growth Rate

Fatigue crack growth prediction model under variable amplitude loading conditions

Modeling of Fatigue Crack Propagation

Fatigue Crack Growth Prediction Based on Unique Crack Growth Rate Curve Model

A general energy-based model for fatigue life prediction of high-temperature structural materials

An Energy Dissipation-Based Fatigue Crack Growth Model

An Analytical Model for Fatigue Crack Propagation Prediction with Overload Effect

A NEW NON-LINEAR CONTINUUM DAMAGE MECHANICS MODEL FOR THE FATIGUE LIFE PREDICTION UNDER VARIABLE LOADING

A Uniaxial Tensile Behavior Based Fatigue Crack Growth Model

The extended McEvily model for fatigue crack growth analysis of metal structures

Modeling Fatigue Crack Growth for a Through Thickness Crack: an Out-of-plane Constraint-Based Approach Considering Thickness Effect