Abstract:Split Hopkinson pressure bar (SHPB) tests were conducted on pre-rolled AZ31 magnesium alloy at 150–350 ℃ with strain rates of 2150s-1, 3430s-1 and 4160s-1. The mechanical response, microstructural evolution and accommodation mechanism of the pre-rolled AZ31 magnesium alloy under high-speed impact loading were investigated. The twin and shear band are prevailing at low temperature, and the coexistence of twins and recrystallized grains is the dominant microstructure at medium temperature, while at high temperature, dynamic recrystallization (DRX) is almost complete. The increment of temperature reduces the critical condition difference between twinning and DRX, and the recrystallized temperature decreases with increasing strain rate. The mechanical response is related to the competition among the shear band strengthen, the twin strengthen and the fine grain strengthen and determined by the prevailing grain structure. The fine grain strengthen could compensate soften caused by the temperature increase and the reduction of twin and shear band. During high-speed deformation, different twin variants, introduced by pre-rolling, induce different deformation mechanism to accommodate plastic deformation and are in favor for non-basal slip. At low temperature, the high-speed deformation is achieved by twinning, dislocation slip and the following deformation shear band at different deformation stages. At high temperature, the high-speed deformation is realized by twinning and dislocation slip of early deformation stage, transition shear band of medium deformation stage and DRX of final deformation stage.

Effect of Grain Size on Adiabatic Shear Sensitivity of AZ31 Magnesium Alloys

Adiabatic Shear Behaviour of AZ31 Alloy with Different Grain Size under High-Strain-rate

Effect of Strain on the Adiabatic Shear Behaviour of AZ31 Magnesium Alloy

Microstructure evolution and characterization of the adiabatic shear bands in AZ31 magnesium alloy

Comparison of the Strain Rate Sensitivity in AZ31 and WE43 Magnesium Alloys under Different Loading Conditions

Microstructure Evolution of Adiabatic Shear Band in AZ31 Alloy under Dynamic Compression

Effect of Grain Size Refinement on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy

Effect of Extrusion-Sheer on the Microstructure and Mechanical Properties of Magnesium Alloy AZ31

Microstructure Evolution During High Strain Rate Tensile Deformation of A Fine-Grained Az91 Magnesium Alloy

Mechanical Properties and Microstructure Evolution of AZ31 Magnesium Alloy Sheet Subjected to High Strain Rates Loading of Different Orientations

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy

Relationship Between Mechanical Properties and Grain Size of AZ80 at 350 °C under Different Strain Rates

Effect of Grain Size on the Microstructure and Mechanical Properties of Mg-4Y-3Nd-0.5Zr Alloy

Influences of Shear Angles on Microstructures and Compression Properties of AZ31 Mg Alloy Prepared by Extrusion-Shear Process

Effects of High Strain Rate on Mechanical Properties of As-extruded AZ61 Magnesium Alloy

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Mechanical Behaviors of Magnesium Alloy AZ61 under Different Strain Rates and Heating Rates

Effects of Grain Size, Texture and Twinning on Mechanical Properties and Work-Hardening Behaviors of Pure Mg

Unveiling the mechanical response and accommodation mechanism of pre-rolled AZ31 magnesium alloy under high-speed impact loading

Effect of grain size distribution and texture on the cold extrusion behavior and mechanical properties of AZ31 Mg alloy

Effect of Strontium on the Microstructure, Mechanical Properties, and Fracture Behavior of AZ31 Magnesium Alloy