Abstract:In-plane uniaxial tension of AZ31 magnesium alloy sheet with non-basal texture has been conducted in order to demonstrate the effects of loading direction on the microstructure evolution and mechanical properties at ambient temperature. Loading axes are chosen to be along five directions distributed between rolling direction (RD) and transverse direction (TD), allowing various activities in involved slip and twinning modes to take place. As for twinning modes, electron backscattered diffraction observations confirm that the contribution of \({{\{ 10\overline{1}1\} }}\) compression twinning is minimal to the plastic deformation of all deformed samples. By comparison, \({{\{ 10\overline{1}2\} }}\) extension twinning (ET) not only serves as an important carrier on sustaining and accommodating plastic strain but also contributes to the emergence of TD-component texture with the progression of plastic strain. In terms of slip modes, analysis on Schmid factor demonstrates that the increasing tilted angle between loading direction and RD of sheet is unfavorable to the activation of basal <a> slip, whereas it contributes to the activation of prismatic <a> slip. These observations consequently explain the increasing tendency of 0.2% proof yield stress. Moreover, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET collectively contribute to the concentration of two tilted basal poles toward normal direction. With increasing angle between loading direction and RD, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET are gradually weakened. This leads to a weakening tendency about concentration of two tilted basal poles, a generally increasing tendency about Lankford value (r-value) and a generally decreasing tendency about strain-hardening exponent (n-value).

Mechanical Properties and Microstructure Evolution of AZ31 Magnesium Alloy Sheet Subjected to High Strain Rates Loading of Different Orientations

Plastic Deformation Mechanisms of AZ31 Magnesium Alloy under High Strain Rate Compression

Dependence of Microstructure Evolution and Mechanical Properties on Loading Direction for AZ31 Magnesium Alloy Sheet with Non-basal Texture During In-Plane Uniaxial Tension

Research on Strain Rate Effects of AZ31B Magnesium Alloy of Different Orientation Samples

Anisotropy of deformation localization under high strain rate loading of AZ31 magnesium alloy plate

Mechanical Properties and Anisotropy of AZ31 Alloy Sheet Processed by Flat Extrusion Container

Microstructure Evolution During High Strain Rate Tensile Deformation of A Fine-Grained Az91 Magnesium Alloy

Microstructure Evolution of AZ31B Magnesium Alloy Sheets Deformed in Different Deformation Directions

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Effects of High Strain Rate on Mechanical Properties of As-extruded AZ61 Magnesium Alloy

Anisotropy in the Mechanical Properties of Az31 Magnesium Alloy after Being Compressed at High Temperatures (up to 823 K)

Asymmetry in the hot deformation behavior of AZ31B magnesium sheets

Microstructures and tensile properties of commercial AZ31B magnesium alloy sheets

Effect of Strain on the Adiabatic Shear Behaviour of AZ31 Magnesium Alloy

Anisotropy of warm-temperature tensile properties of extruded AZ31 magnesium alloy

Microstructure Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheet with Bimodal Texture under Bending Deformation

Dynamic mechanical response and microstructural evolution of extruded Mg AZ31B plate over a wide range of strain rates

Influence of Microstructure and Mechanical Properties on Formability in High Strain Rate Rolled AZ31 Magnesium Alloy Sheets

Anisotropy and Asymmetry of As-Extruded AZ31 Magnesium Alloy Deformed under High Strain Rate

Deformation Behavior of Az31 Magnesium Alloy at Different Strain Rates and Temperatures

Microstructure evolution and mechanical response of extruded AZ31B magnesium alloy sheet at large strains followed by annealing treatment