Abstract:Abstract The feasible resolution of angular displacement measurement by an optical angle sensor based on laser autocollimation is investigated. Improving the sensor sensitivity while maintaining the noise level of the sensor signal as low as possible is necessary to achieve high-resolution angular displacement measurement. In this paper, the contribution of each component, such as a photodiode, a trans-impedance amplifier, and an analog-to-digital converter in the optical angle sensor, to the noise level of the sensor signal is first estimated on the basis of theoretical equations. The feasible sensitivity of the optical angle sensor is also estimated in numerical calculations. The sensitivity of a photodiode element at the edge of its photosensitive area is evaluated in experiments to realize the estimation of the angle sensor sensitivity. Experimental results are applied to the numerical calculations. The influences of the measurement laser beam diameter, the spot diameter of the focused laser beam on the photosensitive area, and the focal length of the collimator objective of the optical angle sensor are also considered in the numerical calculations. Finally, a prototype optical setup is developed. Experiments are performed to demonstrate that a compact optical angle sensor based on laser autocollimation with a collimator objective having a focal length shorter than 100 mm can achieve a resolution beyond 0.001 arc-second with a bandwidth of 1 kHz. This resolution is better than those achieved by commercial autocollimators employing an image sensor or a position-sensitive detector. The industrial contribution of this paper lies in the detailed breakdown of noise components in the readout signal of an angle sensor in a practical condition and the systematic estimation of its feasible resolution as well as its sensitivity.

Absolute Angular Position Measurement by Dual-Comb Spectroscopy of an Autocollimation Diffracted Beam

Absolute Angular Position Sensing by Dual-Comb Autocollimator

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Laser autocollimation based on an optical frequency comb for absolute angular position measurement

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

Optical Frequency Domain Angle Measurement in a Femtosecond Laser Autocollimator.

Axial nano-displacement measurement with high resolution and wide range based on asymmetrical illumination.

Axial nanodisplacement measurement based on the double-helix point spread function generated using radially polarized beams with vortex phase modulation

Long Focal-Length Measurement Using Divergent Beam and Two Gratings of Different Periods.

A New Optical Angle Measurement and Compensation

Dual-comb Spectroscopy Resolved Three-Degree-of-freedom Sensing

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Mode-locked Laser Autocollimator with an Expanded Measurement Range.

Dual-Comb Based Two-Dimensional Angle Measurement System

S4-4 angle measurement method based on the duel gratings combination

2D Micro-Angle Sensor Based on Laser Autocollimation

A compact 2D micro-angle sensor

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of Dual-Axis Absolute and Relative Displacement

Feasible Resolution of Angular Displacement Measurement by an Optical Angle Sensor Based on Laser Autocollimation

Radial Displacement Measurement Method by Using a Grating-Corner-Cube Sensor Based on Dual-Comb Spectroscopy