Abstract:Polymethyl methacrylate (PMMA) is a material with good surface wettability and has unique and widespread applications in industrial fields. However, fabricating this material in an environmentally friendly way while maintaining its mechanical robustness remains a challenging task. One effective way is through the rational design of microstructure surfaces. The current study fabricated a pyramid microstructure array on a mold surface using offset-tool-servo flycutting, which was then combined with hot embossing to replicate an inverted pyramid microstructure array on a PMMA surface. Firstly, a toolpath compensation algorithm was developed to linearize the arc toolpath and reduce the cost of ultra-precision lathe. Then, the algorithm was further developed to achieve automatic linear toolpath intersection, aiming to ensure the machining accuracy and improve machining efficiency. An experiment testing the linear toolpath intersecting at 90° was conducted, fabricating a pyramid microstructure array with nanoscale roughness on the mold surface. This surface was then employed for replicating an inverted pyramid microstructure array on the PMMA surface using hot embossing. Furthermore, the accuracy of replication was evaluated, and the experimental results demonstrated excellent replication fidelity, exceeding 98%. The microstructural surface of the PMMA exhibited a change in surface wettability. The wettability test showed a water-droplet contact angle reduction from 84.8° ± 0.1° to 56.2° ± 0.1°, demonstrating a good hydrophilic effect. This study introduces a novel, environmentally friendly and high-precision method to fabricate a functional PMMA surface with an inverted pyramid microstructure array. The results of this study also provide strong technical support and theoretical guidance for micro-nanostructure functional surface machining and replicating.

The Effects of Feedback Control Parameters on the Formation of Protuberances in Poly(methyl Methacrylate) by Dynamic Plowing Lithography

Characterization Study on Machining PMMA Thin-Film Using AFM Tip-Based Dynamic Plowing Lithography

Study on the Effects of the Machining Parameters on the Fabrication of Nanoscale Pits Using the Dynamic Plowing Lithography Approach

Fabrication of None-Ridge Nanogrooves with Large-Radius Probe on Pmma Thin-Film Using Afm Tip-Based Dynamic Plowing Lithography Approach

Energy Dissipation Contributed on the Machined Depth Via Dynamic Plowing Lithography of Atomic Force Microscopy

Fabrication of Periodic Nanostructures Using Dynamic Plowing Lithography with the Tip of an Atomic Force Microscope

Processing and Profile Control of Microhole Array for PDMS Mask with Femtosecond Laser

3d Finite Element Modeling Of Laser Machining Pmma

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Molecular Dynamics and Experimental Study on Comparison Between Static and Dynamic Ploughing Lithography of Single Crystal Copper

Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film Using the Atomic Force Microscope

Effects of AFM Tip-Based Direct and Vibration Assisted Scratching Methods on Nanogrooves Fabrication on a Polymer Resist

Effects of Diamond Tip Orientation on the Dynamic Ploughing Lithography of Single Crystal Copper

The Study of Deep Lithography and Moulding Process of Liga Technique

Fabrication of Nanoscale Pits with High Throughput on Polymer Thin Film Using AFM Tip-Based Dynamic Plowing Lithography

Modelling and experimental study of nanoscratching process on PMMA thin-film using AFM tip-based nanomachining approach

Nanoscale manipulation of materials patterning through thermomechanical nanolithography using atomic force microscopy

Probing Polymer Deformation Profiles at Varying Depths in Nanoimprint Lithography

Polymerization-Induced Growth of Microprotuberance on the Photocuring Coating.

Fabrication of Polymethyl Methacrylate (PMMA) Hydrophilic Surfaces Using Combined Offset-Tool-Servo Flycutting and Hot Embossing Methods

Design of Microstructure Parameters on a Small Multi-Throttle Aerostatic Guideway in Photolithography