Abstract:In this paper, the single-event burnout (SEB) and reinforcement structure of 1200 V SiC MOSFET (SG-SBD-MOSFET) with split gate and Schottky barrier diode (SBD) embedded were studied. The device structure was established using Sentaurus TCAD, and the transient current changes of single-event effect (SEE), SEB threshold voltage, as well as the regularity of electric field peak distribution transfer were studied when heavy ions were incident from different regions of the device. Based on SEE analysis of the new structural device, two reinforcement structure designs for SEB resistance were studied, namely the expansion of the P+ body contact area and the design of a multi-layer N-type interval buffer layer. Firstly, two reinforcement schemes for SEB were analyzed separately, and then comprehensive design and analysis were carried out. The results showed that the SEB threshold voltage of heavy ions incident from the N+ source region was increased by 16% when using the P+ body contact area extension alone; when the device is reinforced with a multi-layer N-type interval buffer layer alone, the SEB threshold voltage increases by 29%; the comprehensive use of the P+ body contact area expansion and a multi-layer N-type interval buffer layer reinforcement increased the SEB threshold voltage by 33%. Overall, the breakdown voltage of the reinforced device decreased from 1632.935 V to 1403.135 V, which can be seen as reducing the remaining redundant voltage to 17%. The device's performance was not significantly affected.

Single-event burnout of LDMOS with polygon P plus structure

Single-event Burnout of LDMOS with Polygon P+ Structure

Study on Single Event Burnout Effect for 18V LDMOS Based on 0.18µm Process Technology.

A Simulation-Based Evaluation of Single-Event Burnout Mechanisms and Varied SEB Hardening Designs in Power LDMOS Transistors

Thermal and Electrical Study of Single-Event Burnout and Hardening in 600 V Lateral DMOSFETs with Optimized Trench Drain

Study on Single Event Burnout Effect for 700V Double-RESURF SOI LDMOS

Research on Single-Event Burnout Reinforcement Structure of SiC MOSFET

Total Ionizing Dose Effect and Single Event Burnout of VDMOS with Different Inter Layer Dielectric and Passivation.

Study of the mechanism of single event burnout in lateral depletion-mode Ga2O3 MOSFET devices via TCAD simulation

Observation of Single Event Burnout (SEB) in an SOI NLDMOSFET Using a Pulsed Laser

Research on single event effects and hardening design of LDMOS transistors

A Source Segmented LDMOS Structure for Improving Single Event Burnout Tolerance Based on High-Voltage BCD Process

Single-Event Burnout Hardness for the 4H-Sic Trench-Gate MOSFETs Based on the Multi-Island Buffer Layer

Single-Event Burnout Hardening Method and Evaluation in SiC Power MOSFET Devices

Simulation Study on Single-Event Burnout Reliability of 4H-Sic Trench Gate MOSFET with Combined P-buried Layer

Simulation Study of Single-Event Burnout Reliability for 1.7-kV 4H-SiC VDMOSFET

Influence of Accumulated Radiation Effects on Single-event Burnout in SiC MOSFETs

An Improved Single-Event Effect Performance SiC MOSFET of Hole Extraction Pillar Combined With Multilayer P-Shield Structure

Single-event Burnout Effect on Radiation-hardened High-voltage NMOS

Updated Structure of Vertical Double-Diffused MOSFETs for Irradiation Hardening Against Single Events

Drain-Leakage Degradation During Single-Event Burnout Experiments in N-Channel Power VDMOS Transistors