Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Fretting Fatigue Lifetime Estimation for Heterogeneous Material Using Critical Distance with Mesh Control

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Two-Scale Analysis of Fretting Fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics Approach

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Fretting Fatigue Life Model Under Combined Loading

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

On the Use of Data-Driven Machine Learning for Probabilistic Fatigue Life Prediction of Metallic Materials Based on Mesoscopic Defect Analysis

Fatigue life prediction at mesoscopic scale of samples containing casting defects: A novel energy based non-local model

Fatigue life estimation of metal materials based on finite element analysis

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

Fatigue Life Prediction of Notched Details Using SWT Model and LEFM-Based Approach

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors

Applications of Meshless Methods for Damage Computations with Finite Strains

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Uncertainty Quantification of Fatigue Life Prediction in Welded Structures Using Microstructure-Based Simulations

An efficient/accurate multi-scale fatigue prediction method for Metal-Polymer hybrid (MPH) interface

A through process modeling using multi-assistant software applied to radial fatigue life predication of a 356-T6 wheels

Fatigue life prediction of aluminum alloy 6061 based on defects analysis

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method