Abstract:Constructing a ternary blend active layer for polymer solar cells (PSCs) is a widely explored approach to achieve a high power conversion efficiency (PCE). To achieve this, multiple approaches have been explored for dual-acceptor PSCs including acceptor alloy and acceptor cascade. Parallel connection is another working mechanism of ternary blends with the advantage of large freedom in the selection of materials with largely different absorption ranges. Here, we purposely designed two propeller-like perylene diimide (PDI) derivatives, TT-PDI and TZ-PDI, with different central cores and selected one as the third component to be added into a PM6:Y6 blend. The highest PCE of 17.52% was obtained with 10% of Y6 replaced by TZ-PDI in the ternary blend. To our knowledge, this is the first report of a PDI derivative to be added into a PM6:Y6 blend with significantly increased device performance. The improved PCE was ascribed to the high photon absorption due to the wide bandgap and amorphous structure of TZ-PDI, which paved a functional parallel charge generation route without interfering with the nanostructure of the PM6:Y6 blend. This work demonstrated the parallel connected ternary blend as a viable route to construct efficient PSCs and a chemical designing strategy for a suitable third component in ternary blends.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c02007.Synthesis routes and procedures; TGA and DSC curves; CV curves; calculated molecular conformations; SCLC; contact angle measurement for surface energies; GIWAXS and AFM measurements for ternary blends; and PL spectra (PDF)This article has not yet been cited by other publications.

An Efficient Enhancement in Organic Photovoltaics by Introducing Simple-Structured Benzo[1,2-B:4,5-B′]dithiophene-based Large-Bandgap Small Molecules As the Third Component

A simple-structured benzo[1,2-b:4,5-b']dithiophene-based molecule as a third component enables organic solar cells with over 18.2% efficiency

Benzotriazole-Based 3D Four-Arm Small Molecules Enable 19.1 % Efficiency for PM6 : Y6-Based Ternary Organic Solar Cells

Exploring ternary organic photovoltaics for the reduced nonradiative recombination and improved efficiency over 17.23% with a simple large-bandgap small molecular third component

18.02% Efficiency ternary organic solar cells with a small-molecular donor third component

Enhanced short circuit current density and efficiency of ternary organic solar cells by addition of a simple copolymer third component

Small Molecule Ternary Solar Cell with Two Synergistic Electron Acceptors for Enhanced Photovoltaic Performance

A Complementary Absorption Small Molecule for Efficient Ternary Organic Solar Cells

Ternary Organic Solar Cells with a Phase-Modulated Surface Distribution Via the Addition of a Small Molecular Luminescent Dye to Obtain a High Efficiency over 10.5%

A benzobisoxazole-based polymer assisting high efficiency polymer solar cells

A Simple Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Rhodanine Molecular Third Component Enables Over 16.7% Efficiency and Stable Organic Solar Cells

Wide Bandgap Perylene Diimide Derivatives as an Effective Third Component for Parallel Connected Ternary Blend Polymer Solar Cells

Modulation of Morphological, Mechanical, and Photovoltaic Properties of Ternary Organic Photovoltaic Blends for Optimum Operation

Fine-tuning of film morphology through addition of a third component enables organic solar cells with efficiency over 18%

A Large‐Bandgap Guest Material Enabling Improved Efficiency and Reduced Energy Loss for Ternary Polymer Solar Cells

High‐Efficiency Ternary Organic Solar Cells Based on the Synergized Polymeric and Small‐Molecule Donors

Achieving Efficient Ternary Organic Solar Cells Using Structurally Similar Non‐Fullerene Acceptors with Varying Flanking Side Chains

Enhancing Intermolecular Packing and Light Harvesting through Asymmetric Non-Fullerene Acceptors for Achieving 18.7% Efficiency Ternary Organic Solar Cells

Efficiency Enhancement in Small Molecule Bulk Heterojunction Organic Solar Cells Via Additive

All-small-molecule organic solar cells with 18.1% efficiency and enhanced stability enabled by improving light harvesting and nanoscale microstructure

Enhanced Charge Transport and Broad Absorption Enabling Record 18.13% Efficiency of PM6:Y6 Based Ternary Organic Photovoltaics with a High Fill Factor Over 80%