A Large‐Bandgap Guest Material Enabling Improved Efficiency and Reduced Energy Loss for Ternary Polymer Solar Cells

Hang Yang,Yingying Dong,Hongyu Fan,Yue Wu,Chaohua Cui,Yongfang Li

DOI: https://doi.org/10.1002/solr.202100013

IF: 9.1726

2021-04-08

Solar RRL

Abstract:<section class="article-section__content">The rational design of guest photovoltaic materials (the third components) for enhancing the power conversion efficiency (PCE) of ternary polymer solar cells (PSCs) is a challenge. In this work, a large-bandgap material ((5Z,5′Z)-5,5′-(((4,4,9,9-tetrakis(4-hexylphenyl)-4,9-dihydro-s-indaceno[1,2-b:5,6-b′]dithiophene-2,7-diyl)bis(2,5-difluoro-4,1-phenylene))bis(methanylylidene))bis(3-ethyl-2-thioxothiazolidin-4-one, IBR-F) is designed, synthesized, and used as the guest material for ternary PSCs to improve the PCE and reduce the energy loss. IBR-F possesses a larger energy bandgap of 2.04 eV and a deeper highest occupied molecular orbital (HOMO) level compared to PM6, as well as exhibiting good miscibility with PM6. Thus, the HOMO level is effectively downshifted when blending PM6 with IBR-F, which is in favor of obtaining a higher open-circuit voltage (Voc). Meanwhile, the incorporation of IBR-F into the PM6:Y6 blend can maintain the well-developed bulk-heterojunction morphological properties of the host blend without extra thermal annealing and improve the charge dissociation and collection efficiencies. As a result, the ternary PSC based on PM6:IBR-F:Y6 (1:0.2:1.2 w/w) demonstrates a higher Voc of 0.887 V and a reduced energy loss of 0.55 eV compared to the binary device based on PM6:Y6 (1:1.2 w/w) with a Voc of 0.840 V and energy loss of 0.59 eV, delivering an improved PCE of 17.15%. </section>

energy & fuels,materials science, multidisciplinary

What problem does this paper attempt to address?

The paper aims to address the issue of poor energy level matching in polymer solar cells (PSCs), which leads to lower open-circuit voltage (Voc) and excessive energy loss (Eloss). To tackle this challenge, the research team designed and synthesized an organic small molecule material with a large bandgap, IBR-F, as a third component to be added to the PM6:Y6 system. This addition aims to improve the power conversion efficiency (PCE) of ternary polymer solar cells and reduce energy loss. IBR-F has a large bandgap (2.04 eV) and a deep highest occupied molecular orbital (HOMO) energy level, which is beneficial for enhancing the open-circuit voltage of the device compared to PM6. Additionally, IBR-F exhibits good miscibility with PM6, and incorporating IBR-F into the PM6:Y6 blend can maintain the favorable properties of the bulk heterojunction morphology without the need for additional thermal annealing, thereby improving charge separation and transport efficiency. Ultimately, the ternary PSC containing 20% IBR-F demonstrated a higher open-circuit voltage (0.887 V) and fill factor (74.7%), achieving a power conversion efficiency of 17.15%, which is a significant improvement compared to the binary PM6:Y6 device (open-circuit voltage 0.840 V, fill factor 72.1%, power conversion efficiency 15.55%).

A Large‐Bandgap Guest Material Enabling Improved Efficiency and Reduced Energy Loss for Ternary Polymer Solar Cells

Synergistically minimized nonradiative energy loss and optimized morphology achieved via the incorporation of small molecule donor in 17.7% efficiency ternary polymer solar cells

A Novel Wide‐Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

Enhanced short circuit current density and efficiency of ternary organic solar cells by addition of a simple copolymer third component

A Minimal Benzo[c][1,2,5]thiadiazole-Based Electron Acceptor As a Third Component Material for Ternary Polymer Solar Cells with Efficiencies Exceeding 16.0%

Achieving over 11% Power Conversion Efficiency in PffBT4T-2OD-based Ternary Polymer Solar Cells with Enhanced Open-Circuit-voltage and Suppressed Charge Recombination

An Indacenodithienothiophene‐Based Wide Bandgap Small Molecule Guest for Efficient and Stable Ternary Organic Solar Cells

Highly Efficient Ternary All‐Polymer Solar Cells with Enhanced Stability

Wide Bandgap Perylene Diimide Derivatives as an Effective Third Component for Parallel Connected Ternary Blend Polymer Solar Cells

Exploring ternary organic photovoltaics for the reduced nonradiative recombination and improved efficiency over 17.23% with a simple large-bandgap small molecular third component

A benzobisoxazole-based polymer assisting high efficiency polymer solar cells

Improved photon-to-electron response of ternary blend organic solar cells with a low band gap polymer sensitizer and interfacial modification

Simultaneously Decreasing the Bandgap and V oc Loss in Efficient Ternary Organic Solar Cells

Improved Molecular Ordering in a Ternary Blend Enables All‐Polymer Solar Cells over 18% Efficiency

Facile Strategy for Third Component Optimization in Wide-Band-Gap π-Conjugated Polymer Donor-Based Efficient Ternary All-Polymer Solar Cells

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Simultaneous Performance and Stability Improvement of Ternary Polymer Solar Cells Enabled by Modulating the Molecular Packing of Acceptors

Employing a Narrow-bandgap Mediator in Ternary Solar Cells for Enhanced Photovoltaic Performance.

Efficient Dual Mechanisms Boost the Efficiency of Ternary Solar Cells with Two Compatible Polymer Donors to Exceed 19

Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells