Abstract:1T1R spin-transfer-torque (STT) MRAM is a promising candidate for next-generation high-density embedded non-volatile memory [1-2]. However, 1T1R STT-MRAM suffers from limited sensing margin and high write power. As shown in Fig. 30.2.1(a), sense amplifier design is challenging due to the small difference (only 2x) between the high-resistance state (R AP ) and the low-resistance state (R P ), as well as R AP degradation with increasing temperature. Moreover, R P and R AP resistance distributions shift with process variation, requiring a read reference (V ref ) that tracks process. To improve the sensing margin, several offset-cancellation methods have been reported to reduce sense amplifier mismatch [3]. However, these methods use multiple capacitors and hence incur significant area overheads. To address this issue, we propose an offset-cancelled sense amplifier that uses only a single capacitor to significantly improve the sensing margin by more than 60%. A second design challenge for STT-MRAM stems from the high current needed to flip a cell during a write operation. For non-volatile memory applications with a 10-year retention time requirement, the write current can be as high as several hundred μA. However, as shown in Fig. 30.2.1(b), the required write time varies with the state change required (0→1 or 1→0), process variation, and temperature. As a result, a fixed write time that ensures successful write for all conditions wastes a significant energy for typical or average conditions. We propose an in situ write-self-termination method to reduce write energy in most scenarios. The sense amplifier is reconfigured to continuously monitor the write operation and automatically shuts off the write drivers when the state transition is detected, without an area or timing penalty. In addition, dual dummy columns are added in each array to provide read V ref tracking of row-wise PVT variation. A 1Mb STT-MRAM was fabricated in 28nm technology, and achieves a 2.8ns read-access time at 25°C and 3.6ns at 120°C, respectively. With in-situ self-write-termination the write power is reduced by 47% with a 20ns write-access time at 25°C and by 60% at 120°C.

World-most Energy-Efficient MRAM Technology for Non-Volatile RAM Applications

4.7 A 65nm ReRAM-enabled nonvolatile processor with 6× reduction in restore time and 4× higher clock frequency using adaptive data retention and self-write-termination nonvolatile logic

A 1Mb RRAM Macro With 9.8ns Read Access Time Utilizing Dynamic Reference Voltage for Reliable Sensing Operation

A 14nm-Finfet 1mb Embedded 1t1r Rram With A 0.022 Mu M(2) Cell Size Using Self-Adaptive Delayed Termination And Multi-Cell Reference

A 22-nm 1-Mb 1024-b Read Data-Protected STT-MRAM Macro With Near-Memory Shift-and-Rotate Functionality and 42.6-GB/s Read Bandwidth for Security-Aware Mobile Device

A 65-Nm ReRAM-Enabled Nonvolatile Processor with Time-Space Domain Adaption and Self-Write-Termination Achieving $> 4\times $ Faster Clock Frequency and $> 6\times $ Higher Restore Speed

High-density Magnetoresistive Random Access Memory Operating at Ultralow Voltage at Room Temperature

24.2 A 14nm-FinFET 1Mb Embedded 1T1R RRAM with a 0.022µm<sup>2</sup> Cell Size Using Self-Adaptive Delayed Termination and Multi-Cell Reference

8T1R: A Novel Low-power High-speed RRAM-based Non-volatile SRAM Design.

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

In Memory Energy Application for Resistive Random Access Memory

Efficient and Robust Nonvolatile Computing-In-Memory Based on Voltage Division in 2T2R RRAM with Input-Dependent Sensing Control

A 1mb 28nm Stt-Mram With 2.8ns Read Access Time At 1.2v Vdd Using Single-Cap Offset-Cancelled Sense Amplifier And In-Situ Self-Write-Termination

Nanowire Volatile RAM as an Alternative to SRAM

Energy-Efficient Nonvolatile SRAM Design Based on Resistive Switching Multi-Level Cells.

Toward Low Soft Error Sensitivity and Latency Near Memory Computing with EB MRAM

Highly Compact 1T-1R Architecture (4f(2) Footprint) Involving Fully Cmos Compatible Vertical Gaa Nano-Pillar Transistors and Oxide-Based Rram Cells Exhibiting Excellent Nvm Properties and Ultra-Low Power Operation

Towards Efficient Memory Architectures: Low-Power Noise-Immune RRAM

An Error-Free 64KB ReRAM-Based Nvsram Integrated to a Microcontroller Unit Supporting Real-Time Program Storage and Restoration

A 1-Mb 28-Nm 1T1MTJ STT-MRAM with Single-Cap Offset-Cancelled Sense Amplifier and in Situ Self-Write-Termination

Design of a Fast and Low-Power Sense Amplifier and Writing Circuit for High-Speed MRAM