Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Salinity gradient energy harvesting via high concentration response characteristics of activated carbon

Carbonized Peat Moss Electrodes for Efficient Salinity Gradient Energy Recovery in a Capacitive Concentration Flow Cell

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

An electrochemical system for salinity gradient energy harvesting

Activated carbon is an electron-conducting amphoteric ion adsorbent

Studies Of Activated Carbon Electrodes For Capacitive Seawater Desalination

A Charge-free and Membrane-free Hybrid Capacitive Mixing System for Salinity Gradient Energy Harvesting

Cooking Carbon with Protic Salt: Nitrogen and Sulfur Self-Doped Porous Carbon Nanosheets for Supercapacitors

Facile Designed Manganese Oxide/Biochar for Efficient Salinity Gradient Energy Recovery in Concentration Flow Cells and Influences of Mono/Multivalent Ions

Molten salt assisted self-activated carbon with controllable architecture for aqueous supercapacitor

Electrochemical capacitive desalination behavior of activated carbon fibers

Biochar with inherited negative surface charges derived from Enteromorpha prolifera as a promising cathode material for capacitive deionization technology

Concentration Flow Cells for Efficient Salinity Gradient Energy Recovery with Nanostructured Open Framework Hexacyanoferrate Electrodes

Relation Between the Charge Efficiency of Activated Carbon Fiber and Its Desalination Performance

Electrocapacitive desalination with nitrogen-doped hierarchically structured carbon prepared using a sustainable salt-template method

Concentration Flow Cells Based on Chloride-Ion Extraction and Insertion with Metal Chloride Electrodes for Efficient Salinity Gradient Energy Harvest

Charged porous asymmetric membrane for enhancing salinity gradient energy conversion

The regulation of biochar surface potential to achieve rapid capacitive deionization

Investigation of Different Aqueous Electrolytes for Biomass-Derived Activated Carbon-Based Supercapacitors

Sulfonated GO coated carbon electrodes with cation-selective functions for enhanced capacitive deionization of saltwater

Supercapacitive behaviors of N/S co-doped biomass porous carbon-based supercapacitors in "water-in-salt" electrolyte