Abstract:Commercial supercapacitors using available carbon products have long been criticized for the under-utilization of their prominent specific surface area (SSA). In terms of carbonaceous electrode optimization, excessive improvement in SSA observed in the gaseous atmosphere might have little effect on the final performance because cracked/inaccessible pore alleys considerably block the direct electrolyte ion transport in a practical electrochemical environment. Herein, mesopore-adjustable hierarchically porous carbon nanosheets are fabricated based on a micelle-size-mediated spatial confinement strategy. In this strategy, hydrophobic trimethylbenzene in different volumes of the solvent can mediate the interfacial assembly with a carbon precursor and porogen segment through pi-pi bonding and van der Waals interaction to yield micelles with good dispersity and the diameter varying from 119 to 30 nm. With an increasing solvent volume, the corresponding diffusion coefficient (3.1-14.3 m(2) s(-1)) of as obtained smaller micelles increases, which makes adjacent micelles gather rapidly and then grow along the radial direction of oligomer aggregates to eventually form mesopores on hierarchically porous carbon nanosheets (MNC150-4.5). Thanks to the pore expansion effect of trimethylbenzene, the mesoporous volume can be adjusted from 28.8 to 40.0%. Mesopores on hierarchically porous carbon nanosheets endow MNC150-4.5 with an enhanced electrochemically active surface area of 819.5 m(2) g(-1), which gives rise to quick electrolyte accessibility and a correspondingly immediate capacitive response of 338 F g-1 at 0.5 A g(-1 )in a three electrode system. Electrolyte transport through pathways within MNC150-4.5 ultimately enables the symmetric cell to deliver a high energy output of 50.4 Wh kg-1 at 625 W kg-1 in a 14 m LiOTF electrolyte and 95% capacitance retention after 100,000 cycles, which show its superior electrochemical performance over representative carbon-based supercapacitors with aqueous electrolytes in recent literature.

Molten salt assisted self-activated carbon with controllable architecture for aqueous supercapacitor

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

High-energy aqueous supercapacitors enabled by N/O codoped carbon nanosheets and “water-in-salt” electrolyte

Facile Construction Of Highly Redox Active Carbons With Regular Micropores And Rod-Like Morphology Towards High-Energy Supercapacitors

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

Facile Activation of Commercial Carbon Felt As a Low-Cost Free-Standing Electrode for Flexible Supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Spatial Confinement Strategy for Micelle-Size-Mediated Modulation of Mesopores in Hierarchical Porous Carbon Nanosheets with an Efficient Capacitive Response

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

N/O co-doped porous carbon synthesized by lewis acid salt activation for high rate performance supercapacitor

Oxygen-Enriched Hierarchical Nanoporous Carbon Electrodes for Supercapacitors

Molten Salt-Confined Construction of Nitrogen-Doped Hierarchical Porous Carbon for High-Performance Supercapacitors

Supercapacitive behaviors of N/S co-doped biomass porous carbon-based supercapacitors in "water-in-salt" electrolyte

Bimolecular Salt Strategy Enhances Heteroatom Doping and Porosity Optimization of Porous Carbon for Supercapacitors

Green and facile preparation of hierarchical porous carbon with a 3D honeycomb-like structure for high-performance supercapacitors

From salt-filled ZIF-8 to open-door nanoporous carbon with optimized pore system for electrochemical supercapacitor with enhanced energy density

Sustainable supercapacitor electrodes produced by the activation of biomass with sodium thiosulfate

Great Enhancement of Carbon Energy Storage through Narrow Pores and Hydrogen-Containing Functional Groups for Aqueous Zn-Ion Hybrid Supercapacitor

Boosting capacitive performance of N, S co-doped hierarchical porous lignin-derived carbon via self-assembly assisted template-coupled activation

Sodium polyacrylate-based porous carbon fabricated by one-step carbonization and its outstanding electrochemical properties in supercapacitor

One-pot molten salt-assisted synthesis of nitrogen-doped mesoporous carbon for high energy density supercapacitors