Abstract:Resonant acoustic mixing (RAM) is a widely applied technology that utilizes low-frequency vertical harmonic vibration for fluid transfer and mixing. However, the current research on the mixing mechanism of RAM technology primarily focuses on the initial mixing stages, neglecting the subsequent turbulent transition. This lack of understanding hinders the further improvement of RAM technology. This paper aims to investigate the mixing mechanism of power-law non-Newtonian fluids (NNF) in RAM using the phase field model and the spectral analysis. The study focuses on understanding the facilitating effect of turbulent transition in mixing and explores the influence of the power-law index and the excitation parameter on the mixing characteristics. The results indicate that the flow field experiences Faraday instability due to the intense perturbation during transient mixing. This leads to the fluid mixing through the development of large-scale vortex to small-scale vortex. During this process, the frequency components of the flow field are distributed around the working frequency, demonstrating transient and broad frequency characteristics. The steady state then dissipates energy through the viscous dissipation of small-scale vortices and ultimately relies on the single-frequency components such as submultiples and multiples excited by the nonlinear effect to complete the mixing. The mixing effects of NNF and Newtonian fluids (NF) are essentially the same, but they consume energy in different ways. The mixing uniformity and mixing efficiency of NNF increase with increasing vibration acceleration and decrease with increasing vibration frequency. These findings provide new insights into the RAM mechanism of power-law NNF.

Parametric Effects on the Mixing Efficiency of Resonant Acoustic Mixing Technology for High-Viscosity Mixture: A Numerical Study

Effects of Periodic and Non‐periodic Chaotic Mixing on Morphology Development of Immiscible Polymer Blends

Determination and optimisation of Resonant Acoustic Mixing (RAM) efficiency in Polymer Bonded eXplosive (PBX) processing

Assessment of Resonant Acoustic Mixing for Low-Dose Pharmaceutical Powder Blends

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Evolution of HTPB/RDX/Al/DOA mixed explosives with 90% solid loading in resonance acoustic mixing process

Nanoparticle Deagglomeration Driven by a High Shear Mixer and Intensification of Low-Speed Stirring in a Viscous System

Apparent viscosity evolution law of trace RDX-based explosive ink in Resonance Acoustic-Mixing process

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Mixing mechanism of power-law non-Newtonian fluids in resonant acoustic mixing

In-line and Real-time Monitoring of Resonant Acoustic Mixing by Near-infrared Spectroscopy Combined with Chemometric Technology for Process Analytical Technology Applications in Pharmaceutical Powder Blending Systems

Mechanical response characteristics of HMX crystals under resonant acoustic mixing

Continuous flow resonance acoustic mixing technology: a novel and efficient strategy for preparation of nano energetic materials

Particle agglomeration via resonant acoustic mixer for dry powder inhalation

Comparison of Propellant Processing by Cast‐Cure and Resonant Acoustic Mixing

Experimental Research On Mixing Efficiency Of Magnetic Micromixer

The effects of resonance acoustic mixing modulation on the structural and emulsifying properties of pea protein isolate

Effect of Thermal Energy and Ultrasonication on Mixing Efficiency in Passive Micromixers

Parametric study on mixing augmentation mechanism induced by cantilevered ramp injectors in a shock-induced combustion ramjet engine