Abstract:Fuel injection strategies and vortex generators (VGs) play vital roles in effectively managing temperature distribution within the combustion chamber of scramjet engines. By optimizing the fuel injection mechanism and strategically positioning VGs, the efficiency of fuel/air mixing can be significantly improved. In this study, k-epsilon turbulence model used to accurately capture shock waves. The operating Mach number was maintained at 2.0 through the use of a pressure far-field inlet. The investigation focused on three different fuel injection mechanisms: backward-facing, transverse, and forward-facing, while also examining the mixing capabilities of VGs located at varying distances from the inlet. Detailed analysis was conducted to understand the impact of these factors. Backward flow injection was found to promote efficient mixing and reduce the risk of flame blowout. Furthermore, optimizing the injection location proved instrumental in enhancing fuel and air mixing efficiency, leading to higher Mach numbers and improved combustion efficiency. However, it is important to avoid excessively high Mach numbers as they can induce flame instability and blowout. Among the different injection methods, multiple port injection demonstrated the highest Mach numbers, while backward-facing injection yielded the lowest. Multiple port injection also achieved high static pressure. Introducing VGs into the system significantly increased static pressure, and optimal fuel injection and VGs location resulted in stable combustion, improved combustion efficiency, and minimized unburned fuel. The injection method and the presence of VGs greatly influenced turbulence kinetic energy. Notably, VGs located at distances of 81 mm and 31 mm from the inlet produced the highest turbulence intensity for forward-facing injection and transverse fuel injection, respectively.

Parametric study on mixing augmentation mechanism induced by cantilevered ramp injectors in a shock-induced combustion ramjet engine

Hydrogen mixing augmentation mechanism induced by the vortex generator and oblique shock wave in a scramjet engine

Investigation of the Mixing Characteristics in a Transverse Hydrogen Injection Combustor with an Inlet Compression Ramp

Investigation on the impact of the induced shock wave on the hydrogen mixing augmentation in a supersonic crossflow: A numerical study

Mixing augmentation induced by the combination of the oblique shock wave and secondary recirculation jet in a supersonic crossflow

Improvement of Mixing Efficiency in the Combustion Chamber of a Powder-Fuel Ramjet Engine

Mixing and combustion augmentation of the RBCC with different mixer configurations in ejector mode

Effects of Ramp-Induced Incident Shock Impingement Under Various Slope Angle Configurations in a Strut-Based/Cavity-Assisted Supersonic Combustor

Optimization and Data Mining for Shock-Induced Mixing Enhancement inside Scramjet Using Stochastic Deep-Learning Flowfield Prediction

MIXING ENHANCEMENT BY SHOCK IMPINGEMENT IN A GENERIC SCRAMJET COMBUSTION CHAMBER

Measurements of Mixing Layers and Vortex Structures of the Strut-Induced Flow in a Scramjet Combustor with PIV and POD

Study of sonic injection from circular injector into a supersonic cross-flow using large eddy simulation

Research on Mixing Characteristics of Scramjet Combustor Equipped with Strut Injector

Numerical investigation on flow and mixing characteristics of powder fuel under strong shear and shock wave interaction

Richtmyer-Meshkov Instability Induced Mixing Enhancement in the Scramjet Combustor with a Central Strut

Study on solid powder fuel transport characteristics and mixing degree in scramjet combustor

Investigation of strut-ramp injector in a Scramjet combustor: effect of strut geometry, fuel and jet diameter on mixing characteristics

Characteristics of enhanced mixing induced by plate jet actuation in supersonic flow

Enhancing the mixing characteristics of multi-hydrogen jets in scramjet engines through the implementation of fuel injection strategies and vortex generator positioning

Investigation of an Optimal Pulsed Jet Mixing and Combustion in Supersonic Crossflow

Kinematic and Mixing Characteristics of Vortex Interaction Induced by a Vortex Generator Model: a Numerical Study