Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. A detailed computational study was carried out to explore how the presence of a cavity and cavity angles influence the performance and combustion mechanisms within a scramjet combustor. This research utilized ANSYS Fluent 2021 to create hexahedral meshes and simulate the complex fluid dynamics in scramjet engines equipped with dual strut injectors. The simulations addressed various critical aspects of fluid mechanics, including the continuity, momentum (via the Navier-Stokes equations), and energy equations. These equations were used to model non-reacting flows, while the species transport equations were applied to analyse reacting flows. The turbulence within the combustor was modelled using the standard K-ε model, a common choice for such high-speed aerodynamic evaluations. The study's primary goal was to assess the effects of different geometrical configurations of cavity flame holders on the performance characteristics of an H2-based scramjet combustor overall efficiency, focusing on mixing efficiency, combustion performance, and total pressure loss. Both configurations with and without a cavity were examined. Key findings indicate that incorporating a cavity into the combustor design leads to developing a robust recirculation zone within the cavity area. This recirculation zone is pivotal in enhancing fuel-air mixing and combustion efficiency, with cavity-based combustors showing an earlier onset of combustion and achieving peak combustion efficiencies around 90–95%. The extent of the recirculation region is notably influenced by the proximity of the strut injector to the cavity's length. Additionally, the presence of a shear layer within the cavity generates a weak shock at the cavity's trailing edge. This shock interaction can adversely affect scramjet combustor performance, especially at higher cavity angles (α) and specific geometric configurations, such as an L/D ratio of 4 and α=30°. The L/D ratio of 4 and α=30° combustor model results in a 13.8% increase in turbulence intensity, which raises air-fuel mixing and there by improves mixing and combustion efficiency by 14.23% and 13.34%, compared to the other depth of the cavities. This advantage is critical, especially considering the compact length of the combustor, which is a desirable attribute in scramjet design.

Effects of Ramp-Induced Incident Shock Impingement Under Various Slope Angle Configurations in a Strut-Based/Cavity-Assisted Supersonic Combustor

SHOCK INDUCED SEPARATING FLOWS IN SCRAMJET INTAKES

Investigation on compression ramp with surface V-groove for scramjet combustor

Parametric study on mixing augmentation mechanism induced by cantilevered ramp injectors in a shock-induced combustion ramjet engine

Effects of sawtooth grooves on supersonic combustion

Numerical Investigation on the Effect of Inflow Mach Numbers on the Combustion Characteristics of a Typical Cavity-Based Supersonic Combustor

Direct numerical simulation of supersonic internal flow in a model scramjet combustor under a non-reactive condition

Influence of Incident Shocks on Flame Characteristics in the Strut-Equipped Supersonic Combustor

Effects of inflow velocity on transverse jet injection in a supersonic cavity combustor

Effects of Spray Angle Variation on Mixing in a Cold Supersonic Combustor with Kerosene Fuel

Investigation of strut-ramp injector in a Scramjet combustor: effect of strut geometry, fuel and jet diameter on mixing characteristics

Investigation of the Mixing Characteristics in a Transverse Hydrogen Injection Combustor with an Inlet Compression Ramp

Effects of self-throttling on combustion enhancement in supersonic flow with transverse injection

Effects of lifted fuel injection using an upstream ramp of a cavity on scramjet combustion

Instability of isolator shocks to fuel flow rate modulations in a strut-stabilised scramjet combustor

Effects of Injection Pressure Variation on Mixing in a Cold Supersonic Combustor with Kerosene Fuel

Combustion performance of an evaporative flameholder under subsonic-supersonic mixing inflow

Numerical investigation on influence of different geometrical cavity flame holders and flame stabilization mechanism in hydrogen fueled multi-strut-based scramjet combustor

Effects of Staged Injection on Supersonic Mixing and Combustion

Implication of injection angle and jet-to-cross flow ratio on the combustion characteristics of a scramjet combustor

A reliable combustion strategy for a throttling-assisted supersonic combustor with flight Mach 7