Abstract:Abstract Per recent analyses, in the near future, over half amount of the oil extracted globally, will require some form of enhanced oil recovery (EOR) techniques. Existing literature and historical investigations suggest that in oil reservoirs having viscosities between 10 – 150 m.Pa.s, there is a significant potential for tertiary recovery through the application of polymer flooding. For reservoir oil viscosities above 150 mPa.s, the polymer pumping efficiency goes down as polymer injectivity reduces significantly with increasing injection water viscosity that are used to attain a favorable mobility ratio at such high oil viscosities. To overcome this limiting factor, in this study, we propose the use of supramolecular assemblies (SMA) that have adjustable viscosity properties. Complexation of long-chain amino-amides and maleic acid is used to make these assemblies, which allow it to have reversible viscosity depending on the solution pH level. To maintain high injection efficiency, during pumping, SMA solutions will be kept at low viscosity values. On entry in deep reservoir or at oil contact phase, through introduction of an external stimulus the viscosity of SMA solution will be reversed to a much higher viscosity. This will allow to sufficiently improve the mobility ratio. Preliminary results from lab-scale studies have indicated that along with reversibly adjustable viscosity property, SMA solutions are also tolerant to high temperatures and salt concentrations. Supramolecular solutions can be considered as healable polymer systems, since unlike conventional polymer they disassemble and re-assemble when exposed to high temperature and stress conditions. In such conditions, conventional polymers generally undergo degradation. Additionally, through molecular scission processes SMA solutions can also be used in highly confining environments as well as in permafrost conditions and thin zones where conventional thermal techniques are not applicable. The objective of this work is the development of novel SMA system that have the aforementioned properties of reversibly adjustable viscosity through pH, tolerance to high temperature and salt concentrations through desired interfacial properties. Lab-scale preliminary results have shown the potential economic benefits of the use of SMA solutions on a field-wide scale. Based on the results, it must be emphasized that SMA systems have a worldwide application in oil reservoirs for EOR purposes.

Apparent viscosity evolution law of trace RDX-based explosive ink in Resonance Acoustic-Mixing process

Evolution of HTPB/RDX/Al/DOA mixed explosives with 90% solid loading in resonance acoustic mixing process

Determination and optimisation of Resonant Acoustic Mixing (RAM) efficiency in Polymer Bonded eXplosive (PBX) processing

Smart Nanoparticles for Conformance Improvement in Waterflooding

Next-Generation Gelling Agents for Improved Displacement in Enhanced Oil Recovery Processes

Continuous flow resonance acoustic mixing technology: a novel and efficient strategy for preparation of nano energetic materials

3D direct writing and micro detonation of CL-20 based explosive ink containing O/W emulsion binder

Mechanical response characteristics of HMX crystals under resonant acoustic mixing

Research on the performance of high-strength explosive ink and application of direct writing technology in micro-explosive network

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

Three-Dimensional Roll-Up of A Viscoelastic Mixing Layer

The effects of resonance acoustic mixing modulation on the structural and emulsifying properties of pea protein isolate

Assessment of Resonant Acoustic Mixing for Low-Dose Pharmaceutical Powder Blends

Oil-in-water nanoemulsion adhesive system: Preparation by ultrasonic homogenization and its application in 3D direct writing composite energetic materials

Design of High-Energy HMX-Based Composite ink and Research on Micro-Detonation Performance

Viscoelastic Study of Single Chain Cyclized Polymeric Nanoparticles and Linear Polymers Blends

Rheological Behavior Of Epoxy Resin Concentrated Dispersions

In-line and Real-time Monitoring of Resonant Acoustic Mixing by Near-infrared Spectroscopy Combined with Chemometric Technology for Process Analytical Technology Applications in Pharmaceutical Powder Blending Systems

Self-enhancing sono-inks enable deep-penetration acoustic volumetric printing

Mechanical Properties and Thermal Decomposition Mechanism of Glycidyl Azide Polyol Energetic Thermoplastic Elastomer Binder with RDX Composite

Chemical Optimization Strategy of Rapid Additive Manufacturing via Up‐Conversion Assisted Photopolymerization Based Direct Ink Writing