Abstract:With the widespread application of 3D direct writing technology in the field of energetic materials, it has become a current research topic to design an explosive ink with excellent micro-size detonation performance and high-strength mechanical properties and combining it with explosion network technology to improve detonation synchronization has become a research hotspot. This article uses FEVE-F2311 and PF as the composite bonding system, submicron CL-20 as the main explosive, and adds an appropriate amount of TDI as the curing agent to prepare an explosive ink with excellent micro-size detonation performance and high-strength mechanical properties. Research shows that the explosive ink has a detonation velocity of 7322 m·s −1 at a charge density of 1.621 g·cm −3 , a critical propagation size of 0.3×0.3 mm, a critical propagation thickness of 1×0.040 mm, and a maximum detonation Corners can reach 160°. The error of detonation synchronization in the "one in and six out" micro-explosion network is within 150 ns, showing excellent detonation synchronization. The nano-indentation test shows that the average elastic modulus of CL-20-based explosive ink is 6.991 GPa and the average hardness is 0.200 GPa, showing excellent mechanical properties; the compressive stress-strain curve shows that its average compressive stress is 7.62 MPa, showing excellent Compressive strength. It not only greatly improves the mechanical properties of explosive ink, but also provides a method to improve the synchronization performance of micro-explosive networks.

Research on the performance of high-strength explosive ink and application of direct writing technology in micro-explosive network

Preparation of LLM‐105‐Based Explosive Ink and Its Detonating Transfer Performance in Explosive Network

3D direct writing and micro detonation of CL-20 based explosive ink containing O/W emulsion binder

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

Design of High-Energy HMX-Based Composite ink and Research on Micro-Detonation Performance

Direct Writing of Submicron Lines Using the Micro-and Nanofiber Pens

Direct ink writing of high explosive composites containing metal-organic frameworks

Study on Lee-Tarver Model Parameters of CL-20 Explosive Ink

Effect of Printing Parameters on the Surface Roughness of 3D-Printed Melt-Cast Explosive Substitutes Based on Melt Extrusion Technology

Preparation and Properties of Nitrocellulose/Viton Based Nano Energetic by Direct Writing

Study on Mechanical Properties and Penetration Stability of DNAN Based Explosives Under Additive Effects

Apparent viscosity evolution law of trace RDX-based explosive ink in Resonance Acoustic-Mixing process

Control of Crystal Morphology in Energetic Drop-on-demand Inkjet Method

Fabrication of Energetic Composites with 91% Solid Content by 3D Direct Writing

3D printing of RDX-based aluminized high explosives with gradient structure, significantly altering the critical dimensions

Laser-induced Micro-explosion: A Micro-zone Explosive Simulator for the Characterization of Explosives

Ultra-fast, Self-destructing Technology Based on Autocatalytic Energetic Conductive Ink

Oil-in-water nanoemulsion adhesive system: Preparation by ultrasonic homogenization and its application in 3D direct writing composite energetic materials

Molecular Dynamics Simulations for Component Interaction in Dnan/Nto Melt-Cast Explosives

Fabrication and Characterization of a Novel Underground Mining Emulsion Explosive Containing Thickening Microcapsules

Design and characterization of high-performance energetic hydrogels with enhanced mechanical and explosive properties