Abstract:The decrease of both friction and wear is very crucial for reducing oil consumption and the associated environmental pollution. Accordingly, the search continues for novel materials, coatings, lubricants, and systems constituted by the aforementioned ones that can potentially reduce friction and wear. In this paper, a solid-liquid composite lubrication system was constituted by combining g-C3N4 nanosheets as the lubricating oil additives with Ti-DLC film, to achieve a green lubricant providing extreme anti-wear and friction reduction functionality. Tribological properties of the composite lubrication system with different concentrations of g-C3N4 were evaluated using a ball-on-disc sliding friction tester at different normal loads. The results show that both the friction coefficient and wear rate first decreases and then increases with the increase of the g-C3N4 concentration. The lubricant with 1 wt% g-C3N4 exhibits the optimal lubricant property with the friction coefficient of 0.076, 0.078 and 0.082, reducing by nearly 24%, 20%, and 12% compared with base oil for the normal loads of 50 N, 100 N, and 200 N, respectively. However, further increase in the concentration of g-C3N4 results in significant increase in the friction and wear of the tracks. The wear rates show no marked variation with the increasing load, indicating that g-C3N4 nanosheets possess a wide load adaptation range in wear-resistance. As environmentally friendly oil additives, g-C3N4 nanosheets can effectively improve the tribological property of the composite lubrication system. Based on the characterizations of both the Ti-DLC film and wear scars by SEM, XPS, non-contact 3D surface profiler and EDS, the synergistic lubrication mechanism of the g-C3N4 nanosheets and Ti-DLC film is also proposed.

A Green Modification Technology of Carbon Nanotubes Toward Enhancing the Tribological Properties of Aqueous-Based Lubricants

Tribological Behaviors of Surfactant-Functionalized Carbon Nanotubes As Lubricant Additive in Water

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Tribological Properties of CNT microspheres as a Lubricant Additive

Investigation on Tribological Properties of Lubricating Oil with Carbon Nanotubes Additive

Tribological performance and lubrication mechanism of carbon nitride nanosheets as novel and high-efficiency additives for water lubrication

Tribological Performance of Nanocomposite Carbon Lubricant Additive

The Tribological Behaviors and Mechanism of Carbon Nanotubes as Oil Additive

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Optimization of the Rheological Properties and Tribological Performance of SAE 5w-30 Base Oil with Added MWCNTs

Cellulose-armored “CNTs-soft metal” hybrid nanomaterials to improving the friction-reduction and anti-wear performance of bio-lubricants

Experimental Investigation on the Tribological and Rheological Properties of Graphene and FMWCNT Based Nanolubricants with CTAB Surfactants

Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive

Superlubricating UHMWPE Composites with Functionalized Carbon Nanotubes Reinforcement Applicable to Artificial Joints

Composite Lubricating Films with Silane Coupling Agent-Modified Carbon Nanotubes on a Silicon Substrate with Enhanced Wear-Resistant Properties

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Tribological properties of carbon nanotube-doped carbon/carbon composites

Effect of 2D Cu-MOFs modified carbon spheres nanoparticles as an environmentally friendly lubricating additive on tribological properties

Tribological Behavior of Carbon-Nanotube-Filled PTFE Composites

Green Oil Additive G-C3n4: a Feasible Strategy to Enhance the Tribological Properties of DLC Film

Ionic Liquid Modified Multi-Walled Carbon Nanotubes As Lubricant Additive