Abstract:The method for designing diffractive microlens with micro-nano-scale structural features, through iterative angular spectrum algorithm, and fabricating diffractive microlens by single-step photolithography and a wet etching process, based on standard micro-nano-technology, was presented. Surface morphology testing shows that the diffractive microlens fabricated is composed of multi-step continuous relief structures with the feature height in the micrometer range, the distribution of the surface micro-nano-structures is circular symmetry, and the transition between the circular rings is smooth. A large number of fine structures with micro-nano-scale features can be clearly observed in the scanning electron microscope on the surface of the diffractive microlens. Surface roughness data tested shows that the surface roughness of fabricated diffractive microlens is in the nanometer range, which has reached the level of optical mirror. The optical aperture is in the micrometer range. The characteristics of the micro-structures on the surface and the optical aperture can be set and arranged flexibly by the iterative angular spectrum algorithm, according to the characteristics and parameters of the incident and outgoing beam. The results of optical characteristics measurement show that the diffractive microlens can focus incident red laser into a very small bright focal spot, and the phenomenon of focusing and defocusing is obvious. The analysis of beam quality shows that the intensity distribution and size of the focal-spot is in accord with pre-calculated results. The fabricated diffractive microlens indicates a very high diffraction efficiency. The experimental results demonstrate that the performances of the diffractive microlens can be further improved by modifying the design algorithm and optimizing the manufacture craft.

Fabrication of Macrolens with Fully Covered Nanopillars in Large Area by Air-Assisted Deformation and Nanoimprinting

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

Fabrication of Bioinspired Omnidirectional and Gapless Microlens Array for Wide Field-of-view Detections

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabrication of Microlens Array with Controllable High NA and Tailored Optical Characteristics Using Confined Ink-Jetting

Fabrication of Large-Area Silicon Spherical Microlens Arrays by Thermal Reflow and ICP Etching

Direct Fabrication of Microlens Arrays on PMMA with Laser-Induced Structural Modification

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

Fabrication of Microlens Array with Well-Defined Shape by Spatially Constrained Thermal Reflow

Design And Fabrication Of Wafer-Level Microlens Array With Moth-Eye Antireflective Nanostructures

Design and Fabrication of Diffractive Microlens and Analysis of Optical Characteristics

Direct Fabrication of Microlens Arrays with High Numerical Aperture by Ink-Jetting on Nanotextured Surface

Fabrication of Large Curvature Microlens Array Using Confined Laser Swelling Method.

Microoptics: Multifurcate Assembly of Slanted Micropillars Fabricated by Superposition of Optical Vortices and Application in High-Efficiency Trapping Microparticles (Adv. Funct. Mater. 45/2017)

Fabrication of High Integrated Microlens Arrays on a Glass Substrate for 3D Micro-Optical Systems

Fabrication of Polymer Compound Microlens by Lens-on-lens Microstructures

Versatile Route To Gapless Microlens Arrays Using Laser-Tunable Wet-Etched Curved Surfaces

Direct Fabrication of Compound-Eye Microlens Array on Curved Surfaces by a Facile Femtosecond Laser Enhanced Wet Etching Process

Fabrication of Polymer Microlens Array with Controllable Focal Length by Modifying Surface Wettability

Optical Nanofabrication of Concave Microlens Arrays

Large-area Microlens Arrays Fabricated on Flexible Polycarbonate Sheets Via Single-Step Laser Interference Ablation