Abstract:Mn+1AXn phases, or simply MAX phases, are unique nanolayered materials that have been attracting the attention of the nuclear materials community worldwide due to the recent reports of superior radiation resistance compared to conventional ceramics. However, the knowledge and understanding of their response to neutron irradiation is fairly limited, in particular at high temperatures where MAX phases are expected to have high thermodynamic phase stability. In this paper, a complete and extensive study of neutron-irradiation effects at high temperatures on Ti-based MAX phases is presented. The MAX phases Ti3SiC2 and Ti2AlC were irradiated at 1273 K in the High-Flux Isotope Reactor located at the Oak Ridge National Laboratory up to 10 displacement per atom (dpa). Post-irradiation characterisation was performed within a Transmission Electron Microscope on both irradiated and pristine samples. Upon increasing the dose from 2 to 10 dpa, the areal density of black-spots in the Ti2AlC was observed to significantly increase while in the Ti3SiC2, disordered dislocation networks were observed. Regarding the Ti3SiC2, black-spot damage was observed to be concentrated within secondary phases, but absent in the matrix. Dislocation lines and loops were observed at both 2 and 10 dpa. The dislocation loops were identified to be of <a> type. At 2 dpa, stacking faults were observed in both materials, but were absent at 10 dpa. Cavities have also been observed, although no relationship with between size and dose was obtained. Finally, at 10 dpa, both MAX phases exhibited evidences of phase decomposition and irradiation-induced segregation. The presented results shed light on a very complex chain of radiation-induced defects in neutron-induced microstructures in both materials at high temperatures, and provide information that will enable better design of more radiation tolerant materials in the future.

Ion Irradiation Induced Softening in Cr2AlC MAX Phase

Structural Transitions Induced by Ion Irradiation in V2AlC and Cr2AlC

Saturation of ion irradiation effects in Cr2AlC

High Temperature Effects on Irradiation Damage of Ti2AlC

Irradiation Hardening and Microstructure Study of MAX-Phase-Dispersion-Strengthened Vanadium Alloy under Self-Ion Irradiation

The Structural Transitions of Ti3AlC2 Induced by Ion Irradiation

Thermal Effects in Ion Irradiated Ti2AlC and Ti3SiC2

Effects of Irradiation Damage on the Structure in Cr2AlC Thin Film

Point defects and hydrogen-permeation behavior of MAX phase Cr 2 AlC coating by first-principles studies

Evolution of microstructure and mechanical properties of ZrC reinforced FeCrAl alloy after Fe-ions irradiation

Ultrahigh strength-ductility of nanocrystalline Cr 2 AlC coating under micropillar compression

The Critical Role of Irradiated Intermediate State Lattice Distortion on the Amorphization Resistance in MAX Phases

Molecular dynamics simulation of tensile deformation behavior of single-crystal Fe–Cr–Al before and after irradiation

Ab Initio Study Of Irradiation Tolerance For Different M(N+1)Ax(N) Phases: Ti3sic2 And Ti3alc2

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Phase transformation and amorphization resistance in high-entropy MAX phase M2SnC (M = Ti, V, Nb, Zr, Hf) under in-situ ion irradiation

Irradiation-induced structural transitions in Ti 2 AlC

Mechanical Characterisation of the Protective Al$_2$O$_3$ Scale in Cr$_2$AlC MAX phases

Annealing effects on the structure and hardness of helium‐irradiated Cr 2 AlC thin films

Distinct Amorphization Resistance in High-Entropy MAX-phases (ti, M)2AlC (m=nb, Ta, V, Zr) under in Situ Irradiation

Assessing the Neutron-Irradiation Resistance of Ti-Based MAX Phases at High Temperatures