Abstract:As one of the MAX phases, Ti2AlC combines attractive properties of both ceramics and metals, and has been suggested for potential nuclear reactor applications due to its excellent resistance to irradiation. This work is aimed at investigating the high temperature effects on evolution of irradiation damage in the MAX phase Ti2AlC. Ti2AlC was irradiated with 1.1MeV C4+ ions at 298K and 873K with fluences ranging from 2×1015cm−2 to 6×1016cm−2. Scanning electron microscopy (SEM), Raman spectra, grazing incidence X-ray diffraction (GIXRD), transmission electron microscopy (TEM), and nanoindentation were used to characterize the evolution of microstructures and mechanical properties at both temperatures. Significant crackings along grain boundaries were observed in 298K, which were not observed in the samples irradiated at 837K. No amorphization was found in the GIXRD analyses and TEM characterization, and some fcc phases were formed during high dose irradiation at 298K. Raman spectra show that all the vibration modes of Ti2AlC decreased severely in room temperature irradiation, but they nearly remained unchanged in high temperature irradiation at the dose of 2×1015cm−2. Nanoindentation shows significant hardening for Ti2AlC irradiated at high temperature, suggesting the presence of irradiation-induced defects. The current study reveals that the irradiation tolerance of Ti2AlC is significantly improved with increasing temperature, demonstrating the great potential of Ti2AlC for using in advanced nuclear reactors.

Annealing effects on the structure and hardness of helium‐irradiated Cr 2 AlC thin films

Effects of Irradiation Damage on the Structure in Cr2AlC Thin Film

Saturation of ion irradiation effects in Cr2AlC

Reversible phase transformation in Ti2AlC films during He radiation and subsequent annealing

He+ Irradiation Induced Cracking and Exfoliating on the Surface of Ti3AlC2

Ion Irradiation Induced Softening in Cr2AlC MAX Phase

Formation of Nanostructures in Ti2AlC Induced by High-Temperature Helium Irradiation

Effect of annealing on the microstructure, mechanical and electrochemical properties of CrAlC coatings

Irradiation-induced structural transitions in Ti 2 AlC

Structural Transitions Induced by Ion Irradiation in V2AlC and Cr2AlC

Effect of helium pre-implantation on the thermal shock performance of tungsten

Interaction Between Recrystallization and Helium Behavior in Cold-Rolled Nickel

Thermal Effects in Ion Irradiated Ti2AlC and Ti3SiC2

Microstructural and Elemental Evolution of Polycrystalline Α-Sic Irradiated with Ultra-High-fluence Helium Ions Before and after Annealing

High Temperature Effects on Irradiation Damage of Ti2AlC

The Damage Evolution of He Irradiation on Ti3SiC2 As a Function of Annealing Temperature

Influence of annealing on microstructures and mechanical properties of arc-deposited AlCrTiSiN coating

Point defects and hydrogen-permeation behavior of MAX phase Cr 2 AlC coating by first-principles studies

Irradiation damage versus lattice distortion in AlNbTiVCrx (x = 0, 0.5, 1) high-entropy alloys from first-principles calculations and irradiation experiments

Helium irradiation induced microstructural damages and mechanical response of Al2O3-ZrO2-SiC composites

Post-deposition annealing effects on microstructure, mechanical and tribological properties of AlCrN films