Abstract:The strain history affecting the fatigue life of fixed offshore support structures is one of the most important topics in structural monitoring. However, some critical fatigue locations are located below the seabed, and the installation of strain gauges at these locations entails significant maintenance costs. In contrast, acceleration which reflects the vibration characteristics of the structure is an easily accessible and more stable physical parameter. Therefore, this study presents a strain estimation scheme that uses limited acceleration measurements to estimate the dynamic strain field of the fixed offshore support structures. An adaptive displacement reconstruction method is used to obtain the displacements at the master degrees of freedom, then the global displacements are obtained by the evolutionary orthogonal response expansion method, and finally, these displacements are implemented into the numerical software by redefining the boundary conditions to obtain the dynamic strain field. The advantage of the proposed method over the traditional strain- solving forward problem is that it relies solely on measured acceleration and structural geometry information, without requiring displacement, strain, or modal information. The correctness of the proposed method is verified by a numerical jacket platform model with multi-harmonic and non-stationary random excitations. Furthermore, physical experiments under eccentric rotation and hammering excitations are performed to assess the applicability of the proposed method on a wind turbine model equipped with laser displacement and fibre bragg grating sensors as reference measurements. The results show that the proposed method can accurately predict the dynamic strains of jacket platform and wind turbine support structures, while the appropriate agreement between the estimated strains and the numerical results, and the optical measured response is observed, with maximum estimation errors of 1.80% and 4.63%, respectively. Summarily, the application of the approach enables a new type of strain monitoring applicable to fixed offshore support structures.

A Novel Strain Field Reconstruction Method for Test Monitoring

A Strain Field Reconstruction Method Based on Digital Twin Considering Real-Time Loading Deviations from Intended Test

An Improved Strain Field Reconstruction Method Based on Digital Twin for Test Monitoring

A Unified Full-Field Deformation Measurement Method for Beam-Like Structure

A Method to Predict Structural Dynamic Strain Based on Acceleration Signal

Finite Element Method and Experimental Investigation on the Residual Stress Fields and Fatigue Performance of Cold Expansion Hole

Novel Measurement Method for Full-field Bridge Strain and Displacement with Limited Long-gauge Strain Sensors

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

An in-situ self-calibration method for non-contact full-field strain measurement

Study on Strain Field Reconstruction Method of Long-Span Hull Box Girder Based on iFEM

Dynamic Strain Field Estimation of Fixed Offshore Support Structures Using Limited Acceleration Measurements

Time Domain Strain/Stress Reconstruction Based on Empirical Mode Decomposition: Numerical Study and Experimental Validation

Reconstruction of Full-Field Complex Deformed Shapes of Thin-Walled Special-Section Beam Structures Based on in Situ Strain Measurement

Omnidirectional Full-Field Displacement Reconstruction Method for Complex Three-Dimensional Structures

Research on strain testing method and accuracy evaluation of spacecraft in heat and force field

Developments of Strain-Based Failure Assessment Diagram Applications: Measuring Reference Strain by Displacement and a Modified Assessment Method

Displacement Field Reconstruction of Structures under Thermal and Mechanical Loading Environment

Deformation Monitoring and Shape Reconstruction of Flexible Planer Structures Based on FBG

A Real-Time Spatial Deformation Estimation Method Based on Spatial Curvature Decomposition and Interpolation

Feasibility Study of Strain Based Stability Evaluation of Locally Loaded Slopes: Insights from Physical and Numerical Modeling

Computational Modeling Of Realistic Experiment Boundary Conditions And Restraints