Abstract:Guided waves (GW) allow fast inspection of a large area and hence have received great interest from the structural health monitoring (SHM) community. Fiber Bragg grating (FBG) sensors offer several advantages but their use has been limited for the GW sensing due to its limited sensitivity. FBG sensors in the edge-filtering configuration have overcome this issue with sensitivity and there is a renewed interest in their use. Unfortunately, the FBG sensors and the equipment needed for interrogation is quite expensive, and hence their number is restricted. In the previous work by the authors, the number and location of the actuators was optimized for developing a SHM system with a single sensor and multiple actuators. But through the use of the phenomenon of acoustic coupling, multiple locations on the structure may be interrogated with a single FBG sensor. As a result, a sensor network with multiple sensing locations and a few actuators is feasible and cost effective. This paper develops a two-step methodology for the optimization of an actuator–sensor network harnessing the acoustic coupling ability of FBG sensors. In the first stage, the actuator–sensor network is optimized based on the application demands (coverage with at least three actuator–sensor pairs) and the cost of the instrumentation. In the second stage, an acoustic coupler network is designed to ensure high-fidelity measurements with minimal interference from other bond locations (overlap of measurements) as well as interference from features in the acoustically coupled circuit (fiber end, coupler, etc.). The non-sorting genetic algorithm (NSGA-II) is implemented for finding the optimal solution for both problems. The analytical implementation of the cost function is validated experimentally. The results show that the optimization does indeed have the potential to improve the quality of SHM while reducing the instrumentation costs significantly.

Optimal sensor placement and Bi-type response reconstruction for structural health monitoring using long-gauge FBG strain sensing network

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Development of Distributed Long-gage Fiber Optic Sensing System for Structural Health Monitoring

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Novel Measurement Method for Full-field Bridge Strain and Displacement with Limited Long-gauge Strain Sensors

APPLIED RESEARCH ON MONITORING TENSION OF PRESTRESSED CONCRETE BEAM BASED ON FBG SENSING TECHNOLOGY

Structural health monitoring of smart civil structures based on fiber Bragg grating sensing technology

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

Health monitoring of foundations using fiber Bragg grating sensing technology

Full-field Static and dynamic strain measurement by an inverse conjugate beam method with two-type sensor placement

Machine learning-augmented multi-arrayed fiber bragg grating sensors for enhanced structural health monitoring by discriminating strain and temperature variations

Deformation Monitoring and Shape Reconstruction of Flexible Planer Structures Based on FBG

Optimal Design of a Sensor Network for Guided Wave-Based Structural Health Monitoring Using Acoustically Coupled Optical Fibers

Adaptive Fiber Bragg Grating Sensor Network for Structural Health Monitoring: Applications to Impact Monitoring

Distributed fiber optic sensing for internal strain monitoring in full life cycle of concrete slabs with BOFDA technology

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses

Advances in Optimal Sensor Placement for Structural Health Monitoring