Abstract:Graphical The new CuO–(Y2O3)0.4(CeO2)0.2 catalyst has high specific surface area and developed pore structure and exhibits excellent low CO selectivity and high H2 selectivity in methanol steam reforming (MSR) process, which is expected to provide a reference for large‐scale industrial hydrogen production. Compared with the relatively simple monometallic and bimetallic oxide catalytic systems, polymetallic catalysts have attracted much attention in recent years. CuO–(Y2O3)(1−x)/2(CeO2)x (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) polymetallic catalyst for hydrogen production by methanol steam reforming(MSR) was prepared by sol–gel method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy, X‐ray photoelectron spectroscopy (XPS), and Specific surface area and pore size analyser(BET) techniques. XRD results show that the diffraction peaks of CuO–(Y2O3)0.4(CeO2)0.2 are sharp and intense, indicating that it is highly crystalline. SEM results show that the pore structure of catalyst becomes loose with the increase of Ce doping amount, and the catalyst particles become more uniform in size and more loose in shape. The BET results show that compared with other catalysts, CuO–(Y2O3)0.4(CeO2)0.2 catalyst has larger specific surface area, which improves the catalytic performance. XPS results showed that CuO–(Y2O3)0.4(CeO2)0.2 still had catalytic activity after reduction treatment. The results of MSR showed that the doping amount of cerium and the reaction conditions affected the catalytic performance of the catalyst. Ce doping promoted the synergistic effect of Cu and Y, and the hydrogen production of CuO–(Y2O3)0.4(CeO2)0.2 was the highest (about 6.74 × 10−3 mol/min/gcat). Ce doping leads to the change of CO/CO2 selectivity in gas products. The CO selectivity of CuO–(Y2O3)0.4(CeO2)0.2 catalyst is only 2% under the catalytic conditions of 400°C, W/M 4:1, and LHSV 20 h−1, which shows good catalytic activity.

Influence of ceria existence form on deactivation behavior of Cu-Ce/SBA-15 catalysts for methanol steam reforming

Construction of porous Cu/CeO2 catalyst with abundant interfacial sites for effective methanol steam reforming

Deactivation Mechanism of CeO2-Based Mixed Oxide Catalysts Supported on SiO2

Catalysts for Methane Steam Reforming Reaction: Evaluation of CeO2 Addition to Alumina-Based Washcoat Slurry Formulation

Effect of Ceria Amount on Promoting Ni-Co/SBA-15 Catalyst for n-Dodecane Steam Reforming

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Improved hydrogen production performance from methanol steam reforming by Ce‐doped CuO–Y2O3 catalysts

Morphology effect of Pd/In2O3/CeO2 catalysts on methanol steam reforming for hydrogen production

Preparation of a Durable CuO/ZnO/CeO2/ZrO2 Catalyst on an SiC Support by an Inverse Microemulsion/Precipitation Method for Methanol Steam Reforming

Precisely constructing Ce-loaded sulfur resistant catalyst for efficient methane dry reforming

Deactivation and Regeneration of the Commercial Cu/ZnO/Al 2 O 3 Catalyst in Low-Temperature Methanol Steam Reforming

Revealing the Promoting Effect of CeO2 on the Cu/ZnO Catalyst for Methanol Steam Reforming

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Application of Porous Anodic Alumina Monolith Catalyst in Steam Reforming of Dimethyl Ether: Cu/γ-Al2O3/Al Catalyst Degradation Behaviors and Catalytic Activity Improvement by Pre-Competition Impregnation Method

Dynamics of the Cu/CeO2 Catalyst during Methanol Steam Reforming

Increasing Reactivity of Ceria Through Water Assisted Surface Modification

Modulating oxidation state of Ni/CeO<sub>2</sub> catalyst for steam methane reforming: a theoretical prediction with experimental verification

Methane steam reforming for hydrogen production using low water-ratios without carbon formation over ceria coated Ni catalysts

Efficient methanol steam reforming over ZnCeZrOx: the unique role of cerium

Unraveling the Nature of Cerium on Stabilizing Cu/SAPO-34 NH3-SCR Catalysts under Hydrothermal Aging at Low Temperatures

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane