Abstract:We assessed the catalytic properties of the Cu/ZrO2 interface in methanol and formaldehyde steam reforming (MSR and FSR) on powder catalysts by using a comparative approach with respect to the influence of the ZrO2 polymorph support structure (monoclinic (m-)ZrO2 vs. tetragonal (t-)ZrO2), its synthesis routine and the choice of the precursor material on the CO2 selectivity. Our studies reveal that ZrO2 exhibits a pronounced versatility as a support material and its catalytic properties depend most strongly on its surface properties governed by its synthesis, especially by the choice of the Zr precursor. The way of combining the support with copper introduces an additional layer of complexity, but its influence on the MSR performance is limited to a modification of the conditions provided by the ZrO2 support. Exploiting the comparative approach regarding the Cu-ZrO2 catalysts in FSR and MSR – including the pure support materials – in combination with in situ Fourier transform infrared (FT-IR) spectroscopy shows that the CO observed in MSR on Cu/m-ZrO2 can be attributed to a spillover of formaldehyde to the support. Side reactions of m-ZrO2 are suppressed at lower temperatures due to its lack of highly reactive sites, resulting in a CO2-selective MSR performance. In Cu/t-ZrO2, however, the amount of CO is higher and a combination of a formaldehyde spillover to the support and a Cu-ZrO2 phase boundary yielding CO leads to the lower CO2 selectivity of these samples. An elevated number of defects and reactive Lewis acidic and Brønsted basic centers of t-ZrO2 explains this increased activity towards side reactions in contrast to Cu/m-ZrO2 catalysts.

Dynamics of the Cu/CeO2 Catalyst during Methanol Steam Reforming

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Oxidative Steam Reforming of Methanol over Cu-Based Catalysts

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Preparation of a Durable CuO/ZnO/CeO2/ZrO2 Catalyst on an SiC Support by an Inverse Microemulsion/Precipitation Method for Methanol Steam Reforming

[Ce3+-OV-Ce4+] Located Surface-Distributed Sheet Cu-Zn-Ce Catalysts for Methanol Production by CO2 Hydrogenation

Insight into the Dynamic Nature of the Pt-CeO2 Interface in Dry Reforming of Methane

Regulating cobalt chemical state by CeO2 facets preferred exposure for improved ethanol steam reforming

Construction of porous Cu/CeO2 catalyst with abundant interfacial sites for effective methanol steam reforming

Steering the methanol steam reforming performance of Cu/ZrO2 catalysts by modification of the Cu-ZrO2 interface dimensions resulting from Cu loading variation

Influence of the component interaction over Cu/ZrO2 catalysts induced with fractionated precipitation method on the catalytic performance for methanol steam reforming

Reactants‐Driven Surface‐Active Sites on a Cu/CeO2 Catalyst for Methanol Synthesis from Syngas

Insights into the Mechanism of Methanol Steam Reforming Tandem Reaction over CeO2 Supported Single-Site Catalysts.

Induced activation of the commercial Cu/ZnO/Al2O3 catalyst for the steam reforming of methanol

Dry Reforming of Methane over CeO2-supported Pt-Co Catalysts with Enhanced Activity

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Operando induced strong metal-support interaction of Rh/CeO2 catalyst in dry reforming of methane

Dynamic Structural Evolution of CeO2 in CuO‐CeO2 Catalyst Revealed by In Situ Spectroscopy

Mechanistic insights into the catalytic methanol steam reforming performance of Cu/ZrO2 catalysts by in situ and operando studies

Methanol steam reforming over Ni-CeO2 model and powder catalysts: Pathways to high stability and selectivity for H2/CO2 production

Designing Cu0−Cu+ dual sites for improved C−H bond fracture towards methanol steam reforming