Effects of Poly(3-hexylthiophene) Molecular Weight and the Aging of Spinning Solution on the Electrospun Fiber Properties

Humayun Ahmad,Song Zhang,Chih-Ting Liu,Guorong Ma,Jason D. Azoulay,Xiaodan Gu,Mahesh K. Gangishetty,Santanu Kundu

DOI: https://doi.org/10.1021/acsapm.2c01229

2022-01-01

ACS Applied Polymer Materials

Abstract:The electrospinning technique is an attractive route for processing conjugated polymers in a significant quantity for large-scale applications. However, the processing-structure-property relationship of the electrospinning process for conjugated polymers is not well understood. Here, we report the electrospinning of poly(3-hexylthiophene) (P3HT) for three different molecular weights of P3HT: 31, 58, and 83 kDa. Chloroform was used as a solvent, and a high molecular weight poly(ethylene oxide) (PEO) was utilized to facilitate the processing of P3HT. Electrospinning was performed on the freshly prepared and 24 h aged spinning solutions. The aging of the spinning solution led to the self-assembly of P3HT chains, particularly with dominant H aggregation for 83 kDa P3HT. The structure development and properties of the fibers were investigated, including the single-fiber electrical conductivity measured using a custom-built setup. Electrical conductivity has been found to increase with increasing molecular weight, and as high as a fivefold enhancement in single-fiber electrical conductivity was obtained for the fibers from the aged solution compared to the fiber from the freshly prepared solution. Despite a 25% PEO concentration in the fibers, the maximum electrical conductivity of a single fiber was found to be approximate to 2.7 x 10-5 S/cm, similar to the pristine P3HT thin films. Our study provides an additional understanding of P3HT structure development in electrospun fibers as a function of polymer molecular weight and processing steps and relates that to fiber properties.