Abstract:Highly oriented, large area continuous composite nanofiber sheets made from surface-oxidized multiwalled carbon nanotubes (MWNTs) and polyacrylonitrile (PAN) were successfully developed using electrospinning. The preferred orientation of surface-oxidized MWNTs along the fiber axis was determined with transmission electron microscopy and electron diffraction. The surface morphology and height profile of the composite nanofibers were also investigated using an atomic force microscope in tapping mode. For the first time, it was observed that the orientation of the carbon nanotubes within the nanofibers was much higher than that of the PAN polymer crystal matrix as detected by two-dimensional wide-angle X-ray diffraction experiments. This suggests that not only surface tension and jet elongation but also the slow relaxation of the carbon nanotubes in the nanofibers are determining factors in the orientation of carbon nanotubes. The extensive fine absorption structure detected via UV/vis spectroscopy indicated that charge-transfer complexes formed between the surface-oxidized nanotubes and negatively charged (-CN[triple bond]N:) functional groups in PAN during electrospinning, leading to a strong interfacial bonding between the nanotubes and surrounding polymer chains. As a result of the highly anisotropic orientation and the formation of complexes, the composite nanofiber sheets possessed enhanced electrical conductivity, mechanical properties, thermal deformation temperature, thermal stability, and dimensional stability. The electrical conductivity of the PAN/MWNT composite nanofibers containing 20 wt % nanotubes was enhanced to approximately 1 S/cm. The tensile modulus values of the compressed composite nanofiber sheets were improved significantly to 10.9 and 14.5 GPa along the fiber winding direction at the MWNT loading of 10 and 20 wt %, respectively. The thermal deformation temperature increased with increased MWNT loading. The thermal expansion coefficient of the composite nanofiber sheets was also reduced by more than an order of magnitude to 13 x 10(-6)/ degrees C along the axis of aligned nanofibers containing 20 wt % MWNTs.

Chain conformation, crystallization behavior, electrical and mechanical properties of electrospun polymer-carbon nanotube hybrid nanofibers with different orientations

Improved Mechanical and Electrical Properties in Electrospun Polyimide/multiwalled Carbon Nanotubes Nanofibrous Composites

Study of the structural orientation and mechanical strength of the electrospun nanofibers from polymers with different chain rigidity and geometry

A General Strategy to Electrospin Nanofibers with Ultrahigh Molecular Chain Orientation

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Electrospinning of Poly(trimethylene Terephthalate)/carbon Nanotube Composites

Electrospinning of Polyvinylidene Difluoride with Carbon Nanotubes: Synergistic Effects of Extensional Force and Interfacial Interaction on Crystalline Structures

The Fabrication and Electrochemical Properties of Electrospun Nanofibers of a Multiwalled Carbon Nanotube Grafted by Chitosan

Thermal Conductivity of Electrospinning Chain-Aligned Polyethylene Oxide (PEO)

Morphology and Mechanical Properties of MWNTs/PU Compound Nanofibers

Assembly of Well-Aligned Multiwalled Carbon Nanotubes in Confined Polyacrylonitrile Environments: Electrospun Composite Nanofiber Sheets

Elastic Deformation of Multiwalled Carbon Nanotubes in Electrospun MWCNTs–PEO and MWCNTs–PVA Nanofibers

Electrospun Polyacrylonitrile Nanofibers Containing a High Concentration of Well-Aligned Multiwall Carbon Nanotubes

Fabrication and properties of high performance polyimide nanofibrous films by electrospinning

EFFECT OF MULTIWALL CARBON NANOTUBES ON STRUCTURE AND PROPERTIES OF MELT-SPUN PPS FIBERS

Structural Orientation and Tensile Behavior in the Extrusion-Stretched Sheets of Polypropylene/multi-Walled Carbon Nanotubes' Composite

Stretching-Induced Crystallinity and Orientation to Improve the Mechanical Properties of Electrospun Pan Nanocomposites

Preparation and Characterization of Highly Aligned Carbon Nanotubes/Polyacrylonitrile Composite Nanofibers

Electrospinning Fabrication of High Strength and Toughness Polyimide Nanofiber Membranes Containing Multiwalled Carbon Nanotubes

Preparation, Morphology, and Mechanical Properties of Carbon Nanotube Anchored Polymer Nanofiber Composite