Sensitivity-Enhanced High-Pressure Sensor Based on Suspended Fiber-Optic Fabry–Pérot Interferometer

Guanghao Dai,Dan Su,Xueguang Qiao

DOI: https://doi.org/10.1109/tim.2022.3217847

IF: 5.6

2022-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:We propose and demonstrate a suspended fiber-optic Fabry-Perot interferometer for sensitivity-improved high-pressure measurement. A thin-cladding fiber (TCF) is inserted into a silica capillary wherein the end faces of the TCF and single-mode fiber form a suspended Fabry-Perot (FP) structure. The sensitivity of the sensor is determined by the air micro-cavity length L-1 and capillary length L-2. The sensitivity can be controlled by changing the L-2/L-1 ratio. A capillary with inner and outer diameters of 100 and 150 mu m, respectively, was used to experimentally demonstrate this sensitivity enhancement. The L-2/L-1 ratio was increased from 13.4 to 114.6 and the sensitivity increased from-361.41 to-2975.21 pm/MPa were achieved. In the pressure measurement range of 0-80 MPa, the uncertainty in the pressure measurement of the packaged sensor was 0.03%. The sensor has the advantages of small size, simple structure, remarkable accuracy, and large range, together with a much-suppressed temperature cross-sensitivity, approximately0.0011 MPa/degrees C.