Abstract:Propose a rolling method to efficiently prepare fiber metal laminates. The surface of Al alloy sheets is treated with laser and coupling agent to achieve the purpose of toughening interface of composite laminates. In this study, a highly efficient method for preparing Al/CFRTP/Al composite laminates by roller preparation was proposed. Three different surface treatments, namely, anodic oxidation, laser texture and surface modification, were used to improve the strength of the metal‐fiber interface. Results show that composite laminates can be prepared efficiently by using reasonable roll pressing technology. The composite laminates with a thickness of 3 mm has good shear strength when the reduction amount is 0.02 mm. Laser texturing increases the contact area at the laminate interface. The surface roughness of Al alloy sheet is improved after laser texture. Moreover, the matrix in the fiber layer of the laminate can be embedded in the gullies formed by the laser texture to form a mechanical interlocking structure. The shear strength of the laminates was further increased when the laser scanning spacing was 2 mm. The highest shear strength of the laminate is 52.4 MPa after using a coupling agent to modify the surface of the Al alloy sheet. X‐ray photoelectron spectroscopy analysis showed that a new chemical bond was generated at the interface between CFRTP and the Al alloy sheet modified with silane coupling agent, thereby forming a molecular bridge among different materials. Mechanical interlocking structure and the generation of new chemical bonds cause the interface to need to absorb more energy during the failure process, which is conducive to the improvement of the interface strength. Highlights Propose roller pressing to prepare Al/CFRTP/Al composite laminates. Effect of laser texture of the laminates interface is clarified. Mechanism of coupling agents at the interface has been elucidated. Efficient preparation of thermoplastic fiber metal laminates has been achieved.

Light Metal Modification and Composite Preparation by a New Solid-State Processing Process: Rotational Friction Extrusion

High entropy alloy reinforced aluminum matrix composites prepared by novel rotation friction extrusion process: Microstructure and mechanical properties

Friction Extrusion: Solid-State Metal Synthesis and Recycling in Sustainable Manufacturing

Development and characterization of a novel AA6061 composite reinforced with titanium aluminide via friction stir processing

Advancements in Aluminum-Based Composite Manufacturing: Leveraging ZrO2 Reinforcement through Friction Stir Process

FABRICATION OF AA1100/Fl2O3 COMPOSITE STRIPS AND THE IMPROVEMENT OF THEIR ELECTROMAGNETIC, MECHANICAL AND FRACTURE PROPERTIES

Improved Mechanical Properties in Friction Stir Processed Carbon Fiber Reinforced Aluminum Composites

Effect of Rotational Speed on Microstructure and Properties of Al‐Based Composite Reinforced with High‐Entropy‐Alloy Particles Fabricated by Friction Stir Processing

Effect of Rotational Friction Extrusion on Microstructure and Mechanical Properties of 6061 Aluminum Alloys with Different Aging States

Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement

Rolling preparation process and interface toughening mechanism of Al/CFRTP/Al composite laminates

Microstructure and mechanical properties of CrMnFeCoNi high entropy alloy/Al composite with different reinforcement content

Restraint of Intermetallic Compound and Improvement of Mechanical Performance of Ti/Al Dissimilar Alloy by Rotary Friction Welding Based on Laser Powder Bed Fusion

Comprehensive Understanding of the Mechanical Properties and Microstructure Evolution of Aluminum Alloy/steel Laminates During Friction Stir-Assisted Incremental Forming with Synchronous Bonding Process

Investigation on Fractographic and Microstructure Evolution in AA7075/ZrO2/G Multilayer Laminated Composite Fabricated Using Friction Stir Additive Manufacturing Process

Preparation, Microstructure, and Mechanical Properties of Aluminum Matrix Composite by Accumulating Roll Bonding Method

Developing a novel lightweight Al–Mg–Li alloy for laser powder bed fusion additive manufacturing: Parameter optimization, microstructure evolution, and mechanical performance

Recent progress of aluminum alloys and aluminum matrix composites produced via laser powder bed fusion: a review

Fe-bearing phase formation, microstructure evolution, and mechanical properties of Al-Mg-Si-Fe alloy fabricated by the twin-roll casting process

The manufacturing process optimization and the mechanical properties of FeCoCrNi high entropy alloys fabricated by selective laser melting

Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion