Abstract:AZ31B Mg/5052 Al laminated composite sheet with superior mechanical property and good sheet shape was fabricated by novel corrugated roll/flat roll corrugating rolling and flat roll/flat roll flat rolling (CFR) at elevated temperatures. The microstructural evolution and mechanical behavior variation of the composite sheet under CFR hot rolling condition were investigated by experimental and numerical simulation methods. The results show that first-pass corrugated rolling induces relatively high and inhomogeneous shear strain in the Mg side and various corrugated interface positions at a low reduction of 35%. It leads to significant grain refinement, outstanding basal texture modification as well as tensile twin activation Mg alloy, which perfectly coordinates the plastic deformation between hard-to-deform Mg and ductile Al and achieve the strong interface metallurgy bonding in Mg/Al sheet and also significantly improves the mechanical properties of Mg/Al composite sheet. The annealing before second-pass flat rolling causes the pronounced static recrystallization and grain growth of Mg alloy in corrugated-rolling Mg/Al sheet, and the formation of similar to 25 mu m thick interfacial compound layer consisted of Mg17Al12 and Al3Mg2 two sublayers. Second-pass flat rolling with a reduction of 30% further imposes severe inhomogeneous shear deformation on the composite sheet, which results in the formation of a wave-shape three-dimensional bonding interface, and the interface compound layers cracking at peak and waist interface positions or fragmenting into well-aligned discrete particles to the bonding interface, in addition to substantial matrix microstructure refinement, texture modification and twin activation in Mg alloy. Such interface structure greatly enhances the interface bonding force of the Mg/Al composite sheet by the larger interface contact area, mechanical gearing effect as well as particle pinning effect. Hence the significant microstructural refinement, strong interface bonding and low residual stress induced by CFR process account for the excellent performance of the Mg/Al laminated composite sheet.

Rolling preparation process and interface toughening mechanism of Al/CFRTP/Al composite laminates

Mechanism of Interlaminar Strengthening and Toughening of Al/CFRP/Al Composite Laminates

Enhancing Bond Strength Between Carbon Fiber Reinforced Thermoplastic and Aluminum Alloys Through Laser Surface Treatment

Enhancing Interface Bonding Strength of Ti/Al Laminated Composites Via Periodic Surface Nano-Crystallization Pretreatment

A Novel Approach for Preparing Cu/Al Laminated Composite Based on Corrugated Roll

Experimental and Numerical Study on the Improvement of Interlaminar Mechanical Properties of Al/Cfrp Laminates

Enhancing bonding synergy and mechanical response of metal/composite hybrid joints through physicochemical surface pretreatment

Tailoring of interface structure and mechanical properties in ARBed 1100/7075 laminated composites by cold rolling

Study on strengthening and toughening Al/CFRP hybrid composites with biomimetic interface

High-performance Al/Ti Laminated Composite Via Asymmetric Cryorolling and Its Interface Enhancement Mechanism

Achievement of High-strength Al/CFRP Hybrid Joint Via High-speed Friction Stir Lap Joining and Laser Texturing Pretreatment Parameters Variation

Microstructural Evolution and Mechanical Behavior of Mg/Al Laminated Composite Sheet by Novel Corrugated Rolling and Flat Rolling

Microstructure and Mechanical Behaviors of Al/Cu Laminated Composites Fabricated by Accumulative Roll Bonding and Intermediate Annealing

Synergistic Mechanism of Strengthening and Toughening of Tissue Regulation Response to Mg/Al Composite Laminates by Hard Plate Accumulative Roll Bonding

Interface Characteristics Study of Al/Mg Laminated Composite Sheets by Multi-Passes RHR

Influence of laser texturing on the properties of fusion joints between aluminum alloys and carbon fiber reinforced thermoplastic composites

Interfacial strengthening mechanism of SS/CFRTP/SS composite components prepared by mixed co-punch

Interface of AlCrTiN/6061 Laminated Composite Fabricated by One-Pass Rolling and Its Tribological Properties

Laminated Ti-Al Composites: Processing, Structure and Strength

Microstructure Characterization and Mechanical Property of Mg/Al Laminated Composite Prepared by the Novel Approach: Corrugated plus Flat Rolling (CFR)

Microstructure Characteristics and Corrugation Interface Behavior of Al/Mg/Al Composite Plate Rolled under Large Strain