Abstract:Propose a rolling method to efficiently prepare fiber metal laminates. The surface of Al alloy sheets is treated with laser and coupling agent to achieve the purpose of toughening interface of composite laminates. In this study, a highly efficient method for preparing Al/CFRTP/Al composite laminates by roller preparation was proposed. Three different surface treatments, namely, anodic oxidation, laser texture and surface modification, were used to improve the strength of the metal‐fiber interface. Results show that composite laminates can be prepared efficiently by using reasonable roll pressing technology. The composite laminates with a thickness of 3 mm has good shear strength when the reduction amount is 0.02 mm. Laser texturing increases the contact area at the laminate interface. The surface roughness of Al alloy sheet is improved after laser texture. Moreover, the matrix in the fiber layer of the laminate can be embedded in the gullies formed by the laser texture to form a mechanical interlocking structure. The shear strength of the laminates was further increased when the laser scanning spacing was 2 mm. The highest shear strength of the laminate is 52.4 MPa after using a coupling agent to modify the surface of the Al alloy sheet. X‐ray photoelectron spectroscopy analysis showed that a new chemical bond was generated at the interface between CFRTP and the Al alloy sheet modified with silane coupling agent, thereby forming a molecular bridge among different materials. Mechanical interlocking structure and the generation of new chemical bonds cause the interface to need to absorb more energy during the failure process, which is conducive to the improvement of the interface strength. Highlights Propose roller pressing to prepare Al/CFRTP/Al composite laminates. Effect of laser texture of the laminates interface is clarified. Mechanism of coupling agents at the interface has been elucidated. Efficient preparation of thermoplastic fiber metal laminates has been achieved.

Study on strengthening and toughening Al/CFRP hybrid composites with biomimetic interface

Mechanism of Interlaminar Strengthening and Toughening of Al/CFRP/Al Composite Laminates

Study on the Regulation Mechanism of Interfacial Mechanical Properties of Carbon Fiber Reinforced Aluminum Foam Sandwich Interface

Biomimetic papilla texture by femtosecond laser for high-strength CFRTP/A6061-T6 FSSW hybrid structures

Interfacial toughening and bending performance of the CFRP/aluminum-honeycomb sandwich

Rolling preparation process and interface toughening mechanism of Al/CFRTP/Al composite laminates

Experimental and Numerical Study on the Improvement of Interlaminar Mechanical Properties of Al/Cfrp Laminates

Synergistic Enhancement of Strength and Toughness of Fiber-Reinforced Composites by Constructing Biomimetic Intermittent Porous Structure

Enhancing Both Strength and Toughness of Carbon/carbon Composites by Heat-Treated Interface Modification

Enhancing bonding synergy and mechanical response of metal/composite hybrid joints through physicochemical surface pretreatment

Effects of laser hybrid interfacial pretreatment on enhancing the carbon fiber reinforced thermosetting composites and TC4 alloy heterogeneous joint

Study of Synergistic and Competitive Mechanisms on Toughening Cfrp Composites with Intrinsic and Extrinsic Multiscale Interleaves

An organic-inorganic interface structure for CFRP and the enhancement of mechanical properties at room/high temperature

Achievement of High-strength Al/CFRP Hybrid Joint Via High-speed Friction Stir Lap Joining and Laser Texturing Pretreatment Parameters Variation

Influence of Interface on Mechanical Behavior of Al-B4C/Al Laminated Composites under Quasi-Static and Impact Loading

Design of Interfaces for Optimal Mechanical Properties in Al2O3/Mo Laminated Composites

Experimental and numerical study on the new technology of combining 7075‐W Al alloy with carbon fiber reinforced plastic composites

Organic–inorganic interface enhancement for boosting mechanical and tribological performances of carbon fiber reinforced composites

Experimental and Numerical Investigation of the Toughening Mechanisms in Bioinspired Composites Prepared by Freeze Casting

Laser-induced Surface Reconstruction to Enhance Interfacial Bonding Reliability of CFRP/titanium Hybrid Joints

Interlaminar Fracture Properties of Surface Treated Ti-CFRP Hybrid Composites under Long-Term Hygrothermal Conditions