Abstract:The demand for novel laminated sheets encouraged using newer technologies to produce tailored materials for multipurpose applications. An inventive solid-state joining method: friction stir additive manufacturing, which offers several advantages over traditional lamination processes. In this study, the Al 2 O 3 powder is used as reinforcement during AA6063/Al 2 O 3 /AA6063 composites fabrication. The fabricated specimen was characterized by bonding features such as thickness reduction, metallography, mechanical properties, and tribological performances and compared with sheet lamination and base metal. The optical microscope and scanning electron microscopic images showed that the Al 2 O 3 powder is distributed within the composites. The structural analysis at the interface of the fabricated composite was conducted through X-ray diffraction, confirming the compounds like Mg 2 SiO 4 , Mg 2 Al 4 , and Al 2 O 3 in the crystallographic planes. The microstructural and morphological results of the laminated composite showed the refined and equiaxed grains and also depicted the dispersion of the Al 2 O 3 powder near the stir zone. The microhardness properties were enhanced and obtained as 91.2 HV and 77.5 HV with and without reinforcement, respectively. Further, the ultimate tensile strength with and without reinforcement is improved by 36.9% and 24.7% compared to the base metal. Furthermore, the tribological analysis was performed at variable process parameters. Taguchi's L9 orthogonal array and variance analysis (ANOVA) were done to analyze the effect of individual parameters and their significance. The obtained results showed that load and frequency are significant parameters during the tribology test. The laminated composite's specific wear rate, wear depth, and COF values are less than the sheet lamination and align with ANOVA test results. Furthermore, the wear mechanism was observed, and it was found that sheet lamination has high wear at increased load when compared to laminated composite parts. Therefore, the obtained results dictate that the addition of Al 2 O 3 powder can significantly enhance the bonding strength, mechanical and tribological properties of the fabricated composites.

Investigation on Fractographic and Microstructure Evolution in AA7075/ZrO2/G Multilayer Laminated Composite Fabricated Using Friction Stir Additive Manufacturing Process

Evaluation of Microstructural, Mechanical and Corrosion Behaviours of Laminated AA6061/AA7075 Metal Matrix Composites Build by Friction Stir Additive Manufacturing for Structural Applications

Advancements in Aluminum-Based Composite Manufacturing: Leveraging ZrO2 Reinforcement through Friction Stir Process

Investigation on Bonding Strength and Tribological Performances of Ceramic Laminated AA6063 Composite Developed by Friction Stir Additive Manufacturing

Novel Technique for Design and Manufacture of Alternating Gradient Composite Structure of Aluminum Alloys Using Solid State Additive Manufacturing Technique

Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study

Investigation of Microstructural and Mechanical Characteristics of Friction Stir Welded Aluminum Alloy 7075-t6

Friction stir additive manufactured AA 6061/TiC/GS composite: assessment of microstructural and mechanical properties

Enhancing Aluminum-Based Composite Manufacturing: Leveraging ZrB2 Reinforcement via Friction Stir Process

Fabrication of in Situ Carbon Fiber/aluminum Composites Via Friction Stir Processing: Evaluation of Microstructural, Mechanical and Tribological Behaviors

Development and Mechanical Assessment of Friction Stir Additive Manufactured Al 6061/TiC/GS Composite

Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing

Multi-objective optimization of friction stir additively manufactured Al-7075 multi-layered laminates

Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW

Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy

Effects of Multipass Additive Friction Stir Processing on Microstructure and Mechanical Properties of Al-Zn-Cup/Al-Zn Laminated Composites

Impact of Hard and Soft Reinforcements on the Microstructure, Mechanical, and Physical Properties of the Surface Composite Matrix Manufactured by Friction Stir Processing

Microstructural and sensor data analysis of friction stir processing in fabricating Al6061 surface composites

Impact behavior of long glass fibre reinforced aluminum metal matrix composite prepared by friction stir processing technique for automotive

Influence of friction stir processing on microstructure and mechanical properties of AA6061 reinforced with Zr and Ni metallic particles

Friction Stir Processing of Aerospace Aluminum Alloy by Addition of Carbon Nano Tube