Abstract:The demand for novel laminated sheets encouraged using newer technologies to produce tailored materials for multipurpose applications. An inventive solid-state joining method: friction stir additive manufacturing, which offers several advantages over traditional lamination processes. In this study, the Al 2 O 3 powder is used as reinforcement during AA6063/Al 2 O 3 /AA6063 composites fabrication. The fabricated specimen was characterized by bonding features such as thickness reduction, metallography, mechanical properties, and tribological performances and compared with sheet lamination and base metal. The optical microscope and scanning electron microscopic images showed that the Al 2 O 3 powder is distributed within the composites. The structural analysis at the interface of the fabricated composite was conducted through X-ray diffraction, confirming the compounds like Mg 2 SiO 4 , Mg 2 Al 4 , and Al 2 O 3 in the crystallographic planes. The microstructural and morphological results of the laminated composite showed the refined and equiaxed grains and also depicted the dispersion of the Al 2 O 3 powder near the stir zone. The microhardness properties were enhanced and obtained as 91.2 HV and 77.5 HV with and without reinforcement, respectively. Further, the ultimate tensile strength with and without reinforcement is improved by 36.9% and 24.7% compared to the base metal. Furthermore, the tribological analysis was performed at variable process parameters. Taguchi's L9 orthogonal array and variance analysis (ANOVA) were done to analyze the effect of individual parameters and their significance. The obtained results showed that load and frequency are significant parameters during the tribology test. The laminated composite's specific wear rate, wear depth, and COF values are less than the sheet lamination and align with ANOVA test results. Furthermore, the wear mechanism was observed, and it was found that sheet lamination has high wear at increased load when compared to laminated composite parts. Therefore, the obtained results dictate that the addition of Al 2 O 3 powder can significantly enhance the bonding strength, mechanical and tribological properties of the fabricated composites.

Friction stir additive manufactured AA 6061/TiC/GS composite: assessment of microstructural and mechanical properties

Development and Mechanical Assessment of Friction Stir Additive Manufactured Al 6061/TiC/GS Composite

Investigation on Fractographic and Microstructure Evolution in AA7075/ZrO2/G Multilayer Laminated Composite Fabricated Using Friction Stir Additive Manufacturing Process

Particle Dispersion and Mechanical Properties Enhancement of In-Situ TiB2/7050 Al Matrix Composite Via Additive Friction Stir Deposition

Evaluation of Microstructural, Mechanical and Corrosion Behaviours of Laminated AA6061/AA7075 Metal Matrix Composites Build by Friction Stir Additive Manufacturing for Structural Applications

Development and characterization of a novel AA6061 composite reinforced with titanium aluminide via friction stir processing

Investigation on Bonding Strength and Tribological Performances of Ceramic Laminated AA6063 Composite Developed by Friction Stir Additive Manufacturing

Novel Technique for Design and Manufacture of Alternating Gradient Composite Structure of Aluminum Alloys Using Solid State Additive Manufacturing Technique

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Microstructure, hardness, and wear resistance of AA5083/Ti3SiC2 composites fabricated via friction stir processing

Synergic enhancement of ductility and toughness in friction stir additively fabricated AA6061-T6 build

Development of dissimilar AA2014 and AA2024 based composite with nano-Si3N4 reinforcement by friction stir process technique

Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite

Importance of Al2TiO5 particle on the mechanical and wear performance of stir cast AA6061 composite using Central Composite Design

Impact of friction stir welding parameters and Al2TiO5 reinforcement on the mechanical, wear, and corrosion performance of dissimilar welded aluminium composite joints

Fabrication of Al6061/Ti 3 AlC 2 MAX phase surface composite by friction stir processing and investigation of wear properties

Microstructure and Mechanical Properties of Friction Stir Welded SiC/TiB2 Reinforced Aluminum Hybrid Composites

Friction Stir Processing of Aerospace Aluminum Alloy by Addition of Carbon Nano Tube

Influence of TiC Particles on Mechanical and Tribological Characteristics of Advanced Aluminium Matrix Composites Fabricated through Ultrasonic-Assisted Stir Casting

An appraisal of characteristic mechanical properties and microstructure of friction stir welding for Aluminium 6061 alloy – Silicon Carbide (SiCp) metal matrix composite

Mechanical and corrosion characteristics of 6061–T6 aluminum alloy samples reinforced with alumina micro and nanoparticles fabricated by friction stir processing